IG MARITIME 的国际模拟测试面向所有海员免费开放。注册一次即可保存进度,无限次备考!
CD7055. TOTS 1C-Operation, monitoring, machinery
搜索本栏目请选择题集,开始学习或模拟考试。
题集简介
Seagull CBT 栏目提供自学题目。请选择一组题目,开始学习或模拟考试。
「Seagull CBT — CD7055. TOTS 1C-Operation, monitoring, machinery」共有 1 个题集、76 道题。
学习
学习模式不限时。答题后可查看结果和正确选项,也可返回题目复习。
模拟考试
模拟考试最长 60 分钟,最多 50 道题。完成后可查看正确答案和成绩。
示例题目与答案
以下为题集中的示例。选择学习练习答题,或选择模拟考试检验知识。
If the safety valves fitted on an air reservoir can be isolated from the reservoir, then..
单选
- the reservoir must be fitted with a fusible plug.✓ 正确答案
- the safety valve must be fitted with a fusible plug.
- the compressor must be fitted with a fusible plug.
- it can be used legally without any added safety measures.
What is the most common cause of the lowering in performance of heat exchangers?
单选
- Fouling of the heat transfer surface.✓ 正确答案
- An air lock.
- Low water flow.
- The division plate joint failure.
During discharge, problems with the inert gas plant result in the production of clean inert gas being reduced by 50%. What do you do?
单选
- Advise the Chief Officer so that he can reduce the discharge rate in line with the reduction of the gas supply.✓ 正确答案
- Adjust the boiler controls to increase the fuel and reduce the air in an attempt to reduce the oxygen content of the gas.
- Allow the discharge to continue as the oxygen content in the tanks may not rise significantly during the remaining discharge period.
- Shut down the discharge until the inert gas system problem is resolved.
In plate type coolers you would normally expect the plates to be made of..
单选
- titanium.✓ 正确答案
- silver.
- stainless steel.
- nickel brass.
The cause of an abnormally high condenser pressure within a refrigeration system would be..
单选
- incondensable gases in the refrigerant.✓ 正确答案
- a low cooling water flow through the condenser.
- a defective thermal expansion valve.
- an above normal level of refrigerant in the condenser.
开始前须知
开始前需要注册吗?
访客可试用 23 分钟。免费注册后可继续学习、保存进度并复习错题。
题目是什么语言?
题目和选项保留原语言。可以单独切换界面语言。
成绩可以作为正式文件吗?
不可以。这是自主练习,成绩无法替代授权机构的考试、证书或知识考核。