IG MARITIME 的国际模拟测试面向所有海员免费开放。注册一次即可保存进度,无限次备考!

CD0416. Fuel oil bunkering, Understanding test results

搜索本栏目

请选择题集,开始学习或模拟考试。

题集简介

Seagull CBT 栏目提供自学题目。请选择一组题目,开始学习或模拟考试。

「Seagull CBT — CD0416. Fuel oil bunkering, Understanding test results」共有 1 个题集、22 道题。

学习

学习模式不限时。答题后可查看结果和正确选项,也可返回题目复习。

模拟考试

模拟考试最长 60 分钟,最多 50 道题。完成后可查看正确答案和成绩。

示例题目与答案

以下为题集中的示例。选择学习练习答题,或选择模拟考试检验知识。

According to this module, if distillate fuel onboard is found to have a high Acid number, what should you do?

单选

  • Send a sample to a specialist testing agency to check for corrosion and/or chemical contamination.✓ 正确答案
  • Increase the rate of cylinder lubrication oil feed, and keep the main engine cooling water temperatures high.
  • Add an alkali to the fuel.
  • Water-wash the fuel using the separators.
Why are catalytic fines so problematic when present in residual fuel oil? Select the ONE correct answer.

单选

  • They are small and difficult to remove, but very hard and cause rapid wear of engine parts.✓ 正确答案
  • They cannot be burned and therefore lead to sticky deposits in the combustion chambers of the engine.
  • They are an indication that the fuel has not been completely refined and may therefore give poor combustion.
  • They are an indication that the fuel oil has been contaminated with other waste oils, such waste lubricating oil, which will give poor combustion.
Why is the Micro Carbon Residue of a distillate fuel important? Select the ONE correct answer.

单选

  • It is a measure of how much energy is released when the fuel is completely burned.
  • It is an indication of how likely it is that filters will be clogged, or need to be changed or back-flushed.
  • It is a measure of how abrasive the deposits left in the engine cylinder will be.
  • High levels result in more carbonaceous deposits in the engine.✓ 正确答案
The condition of distillate fuels can often be quickly assessed by a visual inspection of the sample, which should be bright and clear. At what temperature should this test be carried out? Select the ONE correct answer.

单选

  • Between 10 and 25 degrees Celsius.✓ 正确答案
  • The sample should be cooled to below 10 degrees Celsius.
  • The sample should be warmed to at least 30 degrees.
  • The sample should be warmed to within 10 degrees Celsius of its closed flash point.
According to this module, how should Type 2 and 3 ECA compliant fuels be treated? Select the ONE correct answer.

单选

  • They should be treated as residual heavy fuel oil of corresponding grade, particularly with regard to heating.✓ 正确答案
  • They should be treated as distillate fuels.
  • They should not be heated in storage.
  • They should not be centrifuged, as this causes the constituents to separate.

开始前须知

开始前需要注册吗?

访客可试用 23 分钟。免费注册后可继续学习、保存进度并复习错题。

题目是什么语言?

题目和选项保留原语言。可以单独切换界面语言。

成绩可以作为正式文件吗?

不可以。这是自主练习,成绩无法替代授权机构的考试、证书或知识考核。