Todos os testes internacionais da IG MARITIME são gratuitos para marítimos. Basta registar-se uma vez para guardar o seu progresso e preparar-se sem limites.

ES3-Maintenance and Repair of Machinery

Pesquisar nesta secção

Escolha um conjunto de perguntas e comece a estudar ou faça um exame de treino.

Sobre este conjunto

Na secção Видеотел encontra perguntas para estudo autónomo. Escolha um conjunto para estudar ou fazer um exame de treino.

«Видеотел — Engine Category — ES3-Maintenance and Repair of Machinery» contém 128 perguntas em 1 conjunto.

Estudo

O modo de estudo não tem limite de tempo. Depois de responder, pode ver a avaliação e as opções corretas. Pode voltar a uma pergunta e repetir um tema.

Exame de treino

Um exame de treino dura até 60 minutos e inclui até 50 perguntas do conjunto selecionado. As soluções e os resultados aparecem no fim.

Exemplos de perguntas e respostas

Estes exemplos fazem parte do conjunto. Escolha Estudo para praticar pergunta a pergunta ou Exame de treino para testar os seus conhecimentos.

On a boiler, the valve fitted to protect the boiler from the effects of over pressure is called .................A imagem original não está disponível.

Uma resposta correta

  • 1) the blow down valve.
  • 2) the main stop valve.
  • 3) the safety valve.✓ Resposta correta
  • 4) the feed check valve.
When cleaning or overhauling purifiers, which of the following applies ?A imagem original não está disponível.

Uma resposta correta

  • 1) The inside must only be cleaned with lubricating oil.
  • 2) The separation discs must be kept in their correct order.✓ Resposta correta
  • 3) The discharge ports must be blocked before cleaning.
  • 4) The water supply should be left on during the whole operation.
Plate or tubular heat exchangers are used for which of the following ?A imagem original não está disponível.

Uma resposta correta

  • 1) Heating steam while still in the boiler.
  • 2) Cooling the main engine fresh cooling water.✓ Resposta correta
  • 3) Cooling the water for the fire main.
  • 4) Heating the galley range.
Side cutters are used .....A imagem original não está disponível.

Uma resposta correta

  • 1) to cut the side of metal.
  • 2) to hold metal while it is being cut.
  • 3) to hold cold metal.
  • 4) to cut electrical wiring.✓ Resposta correta
Ship's bunkers are ..........A imagem original não está disponível.

Uma resposta correta

  • 1) another name for the ship's beds.
  • 2) a name to describe the spare gear held onboard.
  • 3) the stores that arrive on board when a ship is newly built.
  • 4) the fuel and lubricating oil used for the operation of the ship.✓ Resposta correta

Antes de começar

Preciso de me registar para começar?

Pode aceder como visitante durante 23 minutos. Registe-se gratuitamente para continuar, guardar o progresso e rever os erros.

Em que idioma estão as perguntas?

As perguntas e opções mantêm o idioma original. Pode alterar separadamente o idioma da interface.

Posso usar o resultado como documento oficial?

Não. É uma prática autónoma. O resultado não substitui um exame, certificado ou avaliação de uma entidade autorizada.