Todos os testes internacionais da IG MARITIME são gratuitos para marítimos. Basta registar-se uma vez para guardar o seu progresso e preparar-se sem limites.

EO7-Maintain Marine Engineering & Control Systems

Pesquisar nesta secção

Escolha um conjunto de perguntas e comece a estudar ou faça um exame de treino.

Sobre este conjunto

Na secção Видеотел encontra perguntas para estudo autónomo. Escolha um conjunto para estudar ou fazer um exame de treino.

«Видеотел — Engine Category — EO7-Maintain Marine Engineering & Control Systems» contém 268 perguntas em 1 conjunto.

Estudo

O modo de estudo não tem limite de tempo. Depois de responder, pode ver a avaliação e as opções corretas. Pode voltar a uma pergunta e repetir um tema.

Exame de treino

Um exame de treino dura até 60 minutos e inclui até 50 perguntas do conjunto selecionado. As soluções e os resultados aparecem no fim.

Exemplos de perguntas e respostas

Estes exemplos fazem parte do conjunto. Escolha Estudo para praticar pergunta a pergunta ou Exame de treino para testar os seus conhecimentos.

On this commonly used electric pressure transmitter, how will you adjust the range ?Ilustração da pergunta

Uma resposta correta

  • 1) With item No. 1.
  • 2) With item No. 2.
  • 3) With item No. 5.
  • 4) With item No. 7.✓ Resposta correta
How is the radius put on thread crests?A imagem original não está disponível.

Uma resposta correta

  • 1) Grinding the threading tool to the correct shape.
  • 2) Using a hand-chasing tool.✓ Resposta correta
  • 3) Using a hand file.
  • 4) Using a separate, correctly ground tool.
When machining a work piece in the centre lathe, what is the purpose of centre drilling the end of the work piece?A imagem original não está disponível.

Uma resposta correta

  • 1) To centre the end for use with the tailstock centre.
  • 2) To centre the end for use with the headstock centre.
  • 3) When turning between centres.
  • 4) For any of these.✓ Resposta correta
On a centre lathe, when turning between centres why may the tailstock centre require backing off?A imagem original não está disponível.

Uma resposta correta

  • 1) To allow access for the tool to the end of the work piece.
  • 2) For facing off the end of the work piece.
  • 3) To allow for expansion of the work piece during machining.✓ Resposta correta
  • 4) To cool the centre bearing.
Which component of a general service air compressor requires most maintenance?A imagem original não está disponível.

Uma resposta correta

  • 1) Piston and rings.
  • 2) Bearings.
  • 3) Delivery valves.✓ Resposta correta
  • 4) Suction valves.

Antes de começar

Preciso de me registar para começar?

Pode aceder como visitante durante 23 minutos. Registe-se gratuitamente para continuar, guardar o progresso e rever os erros.

Em que idioma estão as perguntas?

As perguntas e opções mantêm o idioma original. Pode alterar separadamente o idioma da interface.

Posso usar o resultado como documento oficial?

Não. É uma prática autónoma. O resultado não substitui um exame, certificado ou avaliação de uma entidade autorizada.