Todos os testes internacionais da IG MARITIME são gratuitos para marítimos. Basta registar-se uma vez para guardar o seu progresso e preparar-se sem limites.

CD1543. WHR System, Output Maximisation

Pesquisar nesta secção

Escolha um conjunto de perguntas e comece a estudar ou faça um exame de treino.

Sobre este conjunto

Na secção Seagull CBT encontra perguntas para estudo autónomo. Escolha um conjunto para estudar ou fazer um exame de treino.

«Seagull CBT — CD1543. WHR System, Output Maximisation» contém 15 perguntas em 1 conjunto.

Estudo

O modo de estudo não tem limite de tempo. Depois de responder, pode ver a avaliação e as opções corretas. Pode voltar a uma pergunta e repetir um tema.

Exame de treino

Um exame de treino dura até 60 minutos e inclui até 50 perguntas do conjunto selecionado. As soluções e os resultados aparecem no fim.

Exemplos de perguntas e respostas

Estes exemplos fazem parte do conjunto. Escolha Estudo para praticar pergunta a pergunta ou Exame de treino para testar os seus conhecimentos.

What precautions should be taken to avoid the risk of fire in the exhaust boiler? Select the appropriate options and click Done.

Várias respostas corretas

  • The cooling of the boiler should be maintained at all times.✓ Resposta correta
  • The exhaust gas boiler should not be run dry.✓ Resposta correta
  • The boiler should be kept clean.✓ Resposta correta
  • Water washing should be performed regularly.
Allen, on board the Margrethe vessel, wants to run the engine down just before the cut-in level of its auxiliary blowers. What must he remember? Select the appropriate options and click Done.

Várias respostas corretas

  • He must monitor the exhaust gas temperature before and after the turbocharger.✓ Resposta correta
  • He must run the engine above the cut-out level and then slowly reduce the engine power to run the engine just above the auxiliary blower cut-in level.✓ Resposta correta
  • He must compare the vacuum pressure in the condenser with the design pressure.
  • He must set the load target to 100%.
David knows that the exhaust gas temperature for the Emma vessel should be 165°C or above to avoid the risk of sulphuric acid corrosion. However, as the ME load is low, the temperature of the exhaust gas is lower than 165°C. What should he do to avoid the risk of corrosion? Select the appropriate option and click Done.

Uma resposta correta

  • Decrease the set-point pressure of the HP steam section.
  • Increase the vacuum condenser pressure.
  • Increase the set-point pressure of the LP steam section.✓ Resposta correta
The Chief Engineer onboard the Lima vessel wants to operate the WHR system at the beginning of a voyage. How should he manage the load depending on the status of the steam or power turbine? Drag and drop the ME load options into the correct placeholder and click Done.

Está disponível no estudo e na pesquisa. Sem solução verificada, fica fora do exame.

O banco de origem não fornece uma resposta verificada

Elementos originais da pergunta
  • Increase load
  • Decrease load
  • Increase load
  • Decrease load
James needs to perform soot blowing on board the Gudrun vessel. What should be sequence of the steps? Arrange the steps in the correct sequence by dragging them to the appropriate placeholders and click Done.

Está disponível no estudo e na pesquisa. Sem solução verificada, fica fora do exame.

O banco de origem não fornece uma resposta verificada

Elementos originais da pergunta
  • Blow soot from the LP section
  • Blow soot from the HP section
  • Again, blow soot from the LP section

Antes de começar

Preciso de me registar para começar?

Pode aceder como visitante durante 23 minutos. Registe-se gratuitamente para continuar, guardar o progresso e rever os erros.

Em que idioma estão as perguntas?

As perguntas e opções mantêm o idioma original. Pode alterar separadamente o idioma da interface.

Posso usar o resultado como documento oficial?

Não. É uma prática autónoma. O resultado não substitui um exame, certificado ou avaliação de uma entidade autorizada.