Todos os testes internacionais da IG MARITIME são gratuitos para marítimos. Basta registar-se uma vez para guardar o seu progresso e preparar-se sem limites.

CD0218. Oil Record Book, Part I

Pesquisar nesta secção

Escolha um conjunto de perguntas e comece a estudar ou faça um exame de treino.

Sobre este conjunto

Na secção Seagull CBT encontra perguntas para estudo autónomo. Escolha um conjunto para estudar ou fazer um exame de treino.

«Seagull CBT — CD0218. Oil Record Book, Part I» contém 54 perguntas em 1 conjunto.

Estudo

O modo de estudo não tem limite de tempo. Depois de responder, pode ver a avaliação e as opções corretas. Pode voltar a uma pergunta e repetir um tema.

Exame de treino

Um exame de treino dura até 60 minutos e inclui até 50 perguntas do conjunto selecionado. As soluções e os resultados aparecem no fim.

Exemplos de perguntas e respostas

Estes exemplos fazem parte do conjunto. Escolha Estudo para praticar pergunta a pergunta ou Exame de treino para testar os seus conhecimentos.

When starting a new oil record book you notice that the oily water separator capacity on the IOPP certificate does not match that on the oily water separator name plate. Which one of the following best describes what you should do about this?

Uma resposta correta

  • Ask the master to get the IOPP certificate corrected✓ Resposta correta
  • Ignore it as the ship is already 7 years old
  • Scratch out the capacity on the oily water separator name plate so it cannot be read
  • Assume that the oily water separator capacity has been downgraded
Which one of the following best describes how you can enter the quantity of water pumped overboard from the engine room bilge wells through the oily water separator (OWS) into the oil record book when you have no sounding tables for the bilge wells?

Uma resposta correta

  • You need to estimate the quantity pumped from the OWS capacity and the time it was used for✓ Resposta correta
  • You can estimate the quantity by looking into the bilge well before and after pumping
  • You cannot pump water directly from bilge wells without putting it in a tank to measure the quantity first
  • The quantity does not need to be entered into the oil record book because it has not been in a calibrated tank
Which one of the following is recommended as the first thing to do when starting a new oil record book?

Uma resposta correta

  • Check that it contains the current operation codes✓ Resposta correta
  • Check that it has a blue cover
  • Check that it has a green cover
  • Write the ship’s name on it
The oil record book entry relates to the transfer of 2 m³of sludge to the Incinerator Sludge Service Tank from the Main Sludge Tank, ready for burning. Which one of the following is the correct operation code to enter?

Uma resposta correta

  • Code C✓ Resposta correta
  • Code D
  • Code E
  • Code H
Which one of the following describes the best way to find out which tanks have been designated for sludge and which for holding bilge water on your ship, as far as oil record book entries are concerned?

Uma resposta correta

  • Check the IOPP certificate✓ Resposta correta
  • Check the capacity plan
  • Check the tank plan
  • Check the bilge and waste oil system drawings

Antes de começar

Preciso de me registar para começar?

Pode aceder como visitante durante 23 minutos. Registe-se gratuitamente para continuar, guardar o progresso e rever os erros.

Em que idioma estão as perguntas?

As perguntas e opções mantêm o idioma original. Pode alterar separadamente o idioma da interface.

Posso usar o resultado como documento oficial?

Não. É uma prática autónoma. O resultado não substitui um exame, certificado ou avaliação de uma entidade autorizada.