Todos os testes internacionais da IG MARITIME são gratuitos para marítimos. Basta registar-se uma vez para guardar o seu progresso e preparar-se sem limites.

CD0166. Separators, ALCAP Monitoring and control

Pesquisar nesta secção

Escolha um conjunto de perguntas e comece a estudar ou faça um exame de treino.

Sobre este conjunto

Na secção Seagull CBT encontra perguntas para estudo autónomo. Escolha um conjunto para estudar ou fazer um exame de treino.

«Seagull CBT — CD0166. Separators, ALCAP Monitoring and control» contém 16 perguntas em 1 conjunto.

Estudo

O modo de estudo não tem limite de tempo. Depois de responder, pode ver a avaliação e as opções corretas. Pode voltar a uma pergunta e repetir um tema.

Exame de treino

Um exame de treino dura até 60 minutos e inclui até 50 perguntas do conjunto selecionado. As soluções e os resultados aparecem no fim.

Exemplos de perguntas e respostas

Estes exemplos fazem parte do conjunto. Escolha Estudo para praticar pergunta a pergunta ou Exame de treino para testar os seus conhecimentos.

Which of the following statements is correct?

Uma resposta correta

  • Electrical inputs connect to the left side of the control module.
  • Electrical inputs connect to the right side of the control module.✓ Resposta correta
  • The transducer connects to terminals on the rear circuit board.
  • Electrical outputs connect to the left and right side of the front circuit board.
Which of the following statements is correct?

Uma resposta correta

  • The EPC 400 has 2 printed circuit cards to monitor ALCAP functions.
  • The EPC 400 monitors the transducer and co-ordinates the ALCAP functions with the operating sequence.✓ Resposta correta
  • There are 4 different generations of EPC 400.
  • The EPC 400 can be adjusted to suit different operating voltages.
Before disconnecting any cables to the EPC 400 it should be isolated by?

Uma resposta correta

  • The EPC 400 only runs on 48 volts, it is not necessary to isolate.
  • Switching off the EPC with the fuse switch, located in the top left hand corner of the box.
  • Switching off the motor starter.
  • Switching off the electrical supply to the EPC.✓ Resposta correta
What happens if you keep the alarm accept button pressed for more than 5 seconds?

Uma resposta correta

  • It is possible to display extra process conditions.
  • 32 previous alarms are displayed.
  • A ‘Lamp test’ of all LED’s.✓ Resposta correta
  • A test of the alarm output to the central control room.
The fuses on the front circuit board are numbered from the top as?

Uma resposta correta

  • F1, F2 and F3
  • F2, F3 and F1
  • F3, F1 and F2
  • F2, F1 and F3✓ Resposta correta
  • F3, F2 and F1

Antes de começar

Preciso de me registar para começar?

Pode aceder como visitante durante 23 minutos. Registe-se gratuitamente para continuar, guardar o progresso e rever os erros.

Em que idioma estão as perguntas?

As perguntas e opções mantêm o idioma original. Pode alterar separadamente o idioma da interface.

Posso usar o resultado como documento oficial?

Não. É uma prática autónoma. O resultado não substitui um exame, certificado ou avaliação de uma entidade autorizada.