Todos os testes internacionais da IG MARITIME são gratuitos para marítimos. Basta registar-se uma vez para guardar o seu progresso e preparar-se sem limites.

CD0014. Vessel Struct. Cond.

Pesquisar nesta secção

Escolha um conjunto de perguntas e comece a estudar ou faça um exame de treino.

Sobre este conjunto

Na secção Seagull CBT encontra perguntas para estudo autónomo. Escolha um conjunto para estudar ou fazer um exame de treino.

«Seagull CBT — CD0014. Vessel Struct. Cond.» contém 58 perguntas em 1 conjunto.

Estudo

O modo de estudo não tem limite de tempo. Depois de responder, pode ver a avaliação e as opções corretas. Pode voltar a uma pergunta e repetir um tema.

Exame de treino

Um exame de treino dura até 60 minutos e inclui até 50 perguntas do conjunto selecionado. As soluções e os resultados aparecem no fim.

Exemplos de perguntas e respostas

Estes exemplos fazem parte do conjunto. Escolha Estudo para praticar pergunta a pergunta ou Exame de treino para testar os seus conhecimentos.

With reference to static and dynamic forces acting on the hull, which one of the following statements is most accurate?

Uma resposta correta

  • High static forces, for instance due to poor cargo loading, mean that the vessel is less safe when operating in heavy weather✓ Resposta correta
  • Provided the maximum static loading for the hull has not been exceeded, the vessel should be safe in any weather conditions
  • Dynamic loads on the vessel are insignificant compared to the weight of cargo and ballast
  • Static forces on the vessel are insignificant compared to sea forces
Which one of the following statements is most accurate?

Uma resposta correta

  • The highest forces due to wave action occur when the distance between wave crests is equal to half the length of the ship
  • The highest forces due to wave action occur when the distance between wave crests is equal to twice the length of the ship.
  • The highest forces due to wave action occur when the distance between wave crests is equal to one quarter of the length of the ship.
  • The highest forces due to wave action occur when the distance between wave crests is equal to the length of the ship.✓ Resposta correta
For an evenly loaded built-in beam, which one of the following statements is most accurate?

Uma resposta correta

  • The bending stress is zero at mid length
  • The bending stress is zero at the ends
  • The bending stress is high at mid length and at the ends✓ Resposta correta
  • Bending stress is zero along the whole length
Which one of the following statements about forces on the hull is most accurate?

Uma resposta correta

  • Shear forces on the hull will tend to be high if one hold is fully loaded and the next is empty✓ Resposta correta
  • Shear forces on the hull will be tend to be high if all holds are evenly loaded
  • Shear forces on the hull will tend to be high if all holds are empty
  • Shear forces on the hull will tend to be low if one hold is fully loaded and the next is empty
Which one of these IMO publications requires that Bulk Carriers have a loading instrument?

Uma resposta correta

  • Load line
  • COLREG
  • SOLAS✓ Resposta correta
  • MARPOL

Antes de começar

Preciso de me registar para começar?

Pode aceder como visitante durante 23 minutos. Registe-se gratuitamente para continuar, guardar o progresso e rever os erros.

Em que idioma estão as perguntas?

As perguntas e opções mantêm o idioma original. Pode alterar separadamente o idioma da interface.

Posso usar o resultado como documento oficial?

Não. É uma prática autónoma. O resultado não substitui um exame, certificado ou avaliação de uma entidade autorizada.