Todos os testes internacionais da IG MARITIME são gratuitos para marítimos. Basta registar-se uma vez para guardar o seu progresso e preparar-se sem limites.

CD0007. Inert Gas Generator

Pesquisar nesta secção

Escolha um conjunto de perguntas e comece a estudar ou faça um exame de treino.

Sobre este conjunto

Na secção Seagull CBT encontra perguntas para estudo autónomo. Escolha um conjunto para estudar ou fazer um exame de treino.

«Seagull CBT — CD0007. Inert Gas Generator» contém 75 perguntas em 1 conjunto.

Estudo

O modo de estudo não tem limite de tempo. Depois de responder, pode ver a avaliação e as opções corretas. Pode voltar a uma pergunta e repetir um tema.

Exame de treino

Um exame de treino dura até 60 minutos e inclui até 50 perguntas do conjunto selecionado. As soluções e os resultados aparecem no fim.

Exemplos de perguntas e respostas

Estes exemplos fazem parte do conjunto. Escolha Estudo para praticar pergunta a pergunta ou Exame de treino para testar os seus conhecimentos.

What is the SOLAS requirement regarding non-return devices in the inert gas main for inert gas systems on oil tankers?

Uma resposta correta

  • There must be at least two devices one of which should be a water seal type.✓ Resposta correta
  • There must be at least two water seal type devices fitted.
  • There must be at least two neither of which should be a water seal type.
  • As long as there is a water seal no other devices are required
When considering an independent, oil fired inert gas generator suitable for service onboard an oil tanker what are the SOLAS requirements for the oxygen content of the inert gas supply?

Uma resposta correta

  • A maximum of 5%.✓ Resposta correta
  • A maximum of 8%.
  • A maximum of 11%.
  • A maximum of 3%.
When considering the automatic operation of an independent inert gas generator the start up sequence normally has delays built in to ensure correct timing of the sequence. For example there will be a delay in the sequence to ensure sufficient furnace purging time. How can these delays be ensured in manual mode?

Uma resposta correta

  • By the use of timed interlocks which operate even in the manual mode.✓ Resposta correta
  • The operator is relied upon to ensure the correct timing of the sequence.
  • The delays are only an extra safety precaution so it doesn’t matter if they missed out.
  • There is no need for any delays if the operator is in attendance during start up.
When considering an independent, oil fired inert gas generator, other than providing a vent to the atmosphere during start up of the plant, what is the other main purpose of the automatic atmospheric vent valve?

Uma resposta correta

  • It is used in conjunction with the inert gas main valve to regulate the pressure in the inert gas main.✓ Resposta correta
  • It acts as an inlet for fresh air to the system when gas freeing.
  • It acts as the main relief device in the event of overpressure.
  • It is used to control the capacity of the inert gas generator.
Which of the given options is the one that will most influence the combustion efficiency for the burner type described in this module?

Uma resposta correta

  • Distance from the main burner tip to the edge of the air cone.✓ Resposta correta
  • Distance from main burner tip to pilot burner tip
  • Distance from pilot burner tip to igniter.
  • Distance from pilot burner tip to edge of air cone.

Antes de começar

Preciso de me registar para começar?

Pode aceder como visitante durante 23 minutos. Registe-se gratuitamente para continuar, guardar o progresso e rever os erros.

Em que idioma estão as perguntas?

As perguntas e opções mantêm o idioma original. Pode alterar separadamente o idioma da interface.

Posso usar o resultado como documento oficial?

Não. É uma prática autónoma. O resultado não substitui um exame, certificado ou avaliação de uma entidade autorizada.