Todos os testes internacionais da IG MARITIME são gratuitos para marítimos. Basta registar-se uma vez para guardar o seu progresso e preparar-se sem limites.

Escolha um conjunto de perguntas e comece a estudar ou faça um exame de treino.

Sobre este conjunto

Na secção Furuno ECDIS encontra perguntas para estudo autónomo. Escolha um conjunto para estudar ou fazer um exame de treino.

«Furuno ECDIS — FMD 3x00 v3.1 — Position Event» contém 4 perguntas em 1 conjunto.

Estudo

O modo de estudo não tem limite de tempo. Depois de responder, pode ver a avaliação e as opções corretas. Pode voltar a uma pergunta e repetir um tema.

Exame de treino

Um exame de treino dura até 60 minutos e inclui até 50 perguntas do conjunto selecionado. As soluções e os resultados aparecem no fim.

Exemplos de perguntas e respostas

Estes exemplos fazem parte do conjunto. Escolha Estudo para praticar pergunta a pergunta ou Exame de treino para testar os seus conhecimentos.

Which operation can you perform on the FURUNO ECDIS?

Uma resposta correta

  • I can record my position manually on the ENCs.✓ Resposta correta
  • I can set the ECDIS to automatically choosing a Safety Contour based on my setting of Ship's maximum draft.
  • I can set Ship's maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.
  • I can send a copy of my Route Plan to an AIS target as a Safety Message.
Which operation can you perform on the FURUNO ECDIS?

Uma resposta correta

  • I can play back my ship's past track on the ECDIS.
  • I can record my position manually on the RNCs.✓ Resposta correta
  • I can create Notes from my Voyage Log to document a voyage on the charts.
  • I can set the ECDIS to include engine log information into the Voyage log automatically.
How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?

Uma resposta correta

  • I cannot record own ship's position manually on the FURUNO ECDIS.
  • I record LOP in the Record function of the Event Log.✓ Resposta correta
  • I press the [CTRL] && [ACQ/ACT] button on the Control Unit.
  • I select [Record][Event Log] and [User Event] from the Instant Access bar and insert the observation in the Record User Event window.
How do you manually record Own Ship's current position in the Logs?

Uma resposta correta

  • By opening the Voyage Log and entering the current position.
  • By right clicking on own ship icon on the user interface.
  • By pressing the Record button on the Control Unit.
  • By using the record position event function of the Event Log.✓ Resposta correta

Antes de começar

Preciso de me registar para começar?

Pode aceder como visitante durante 23 minutos. Registe-se gratuitamente para continuar, guardar o progresso e rever os erros.

Em que idioma estão as perguntas?

As perguntas e opções mantêm o idioma original. Pode alterar separadamente o idioma da interface.

Posso usar o resultado como documento oficial?

Não. É uma prática autónoma. O resultado não substitui um exame, certificado ou avaliação de uma entidade autorizada.