Todos os testes internacionais da IG MARITIME são gratuitos para marítimos. Basta registar-se uma vez para guardar o seu progresso e preparar-se sem limites.

MCQ: Flameproof Ex d

Pesquisar nesta secção

Escolha um conjunto de perguntas e comece a estudar ou faça um exame de treino.

Sobre este conjunto

Na secção CompEx encontra perguntas para estudo autónomo. Escolha um conjunto para estudar ou fazer um exame de treino.

«CompEx — MCQ: Flameproof Ex d» contém 26 perguntas em 1 conjunto.

Estudo

O modo de estudo não tem limite de tempo. Depois de responder, pode ver a avaliação e as opções corretas. Pode voltar a uma pergunta e repetir um tema.

Exame de treino

Um exame de treino dura até 60 minutos e inclui até 50 perguntas do conjunto selecionado. As soluções e os resultados aparecem no fim.

Exemplos de perguntas e respostas

Estes exemplos fazem parte do conjunto. Escolha Estudo para praticar pergunta a pergunta ou Exame de treino para testar os seus conhecimentos.

A function (live) test on a flameproof enclosure after some internal adjustments requires which one of the following as minimum requirement?

Uma resposta correta

  • Fit only the corner bolts and apply a "Danger Live" notice
  • All bolts to be replaced- spanner tight- and flamepath gaps checked✓ Resposta correta
  • Only one bolt fitted to support the cover and a :Danger Live" notice
  • Leave cover off, apply a "Danger Live" notice and make sure inadvertent contact with live parts is avoided
2) Which one of the following may be applied in the gap of a flameproof flanged joint to improve the IP rating?

Uma resposta correta

  • (I) Thermosetting sealant;
  • (II) Non setting grease;✓ Resposta correta
  • (III) Non-hardening grease bearing textile tape;
  • (IV) Any oil based paint.
Fitting new (metric thread) cable glands to older flameproof equipment, with imperial thread forms at cable gland entries, may be achieved by?

Uma resposta correta

  • Re-tapping the entries using a metric tap the same size as the gland
  • Using an Exd adaptor with appropriate thread forms✓ Resposta correta
  • Fitting threaded inserts after drilling
  • Fitting the metric glamd as far as possible with the aim of achieving five-full threads engagement
11) One of the design features of flameproof enclosures is?

Uma resposta correta

  • (I) Electric field strength;
  • (II) A gas detector and alarm arrangement;
  • (III) Flanged and/or spigot joints;✓ Resposta correta
  • (IV) An IP67 ingress protection level.
Obstruction of the flamepath openings of the flanged joints of Ex d enclosure by solid obstructions requires minimum clearance depending on the equipment group. For a IIC enclosure this not less than?

Uma resposta correta

  • 30 mm
  • 40 mm✓ Resposta correta
  • 10 mm
  • 50 mm

Antes de começar

Preciso de me registar para começar?

Pode aceder como visitante durante 23 minutos. Registe-se gratuitamente para continuar, guardar o progresso e rever os erros.

Em que idioma estão as perguntas?

As perguntas e opções mantêm o idioma original. Pode alterar separadamente o idioma da interface.

Posso usar o resultado como documento oficial?

Não. É uma prática autónoma. O resultado não substitui um exame, certificado ou avaliação de uma entidade autorizada.