Svi međunarodni probni testovi na platformi IG MARITIME besplatni su za pomorce. Registrirajte se jednom da biste spremili napredak i vježbali bez ograničenja.

CD1543. WHR System, Output Maximisation

Pretraži ovaj odjeljak

Odaberite skup pitanja i započnite učenje ili probni ispit.

O ovom skupu

U odjeljku Seagull CBT dostupna su pitanja za samostalnu pripremu. Odaberite skup pitanja za učenje ili probni ispit.

„Seagull CBT — CD1543. WHR System, Output Maximisation” sadrži 15 pitanja u 1 skupova.

Učenje

Učenje nema vremenskog ograničenja. Nakon odgovora dobit ćete povratnu informaciju i točne opcije. Možete ponoviti pitanje ili temu.

Probni ispit

Probni ispit traje do 60 minuta i uključuje do 50 pitanja iz odabranog skupa. Rješenja i rezultati prikazuju se nakon završetka.

Primjeri pitanja i odgovora

Primjeri su iz objavljenog skupa. Odaberite učenje za vježbu redom ili probni ispit za provjeru znanja.

What precautions should be taken to avoid the risk of fire in the exhaust boiler? Select the appropriate options and click Done.

Više točnih odgovora

  • The cooling of the boiler should be maintained at all times.✓ Točan odgovor
  • The exhaust gas boiler should not be run dry.✓ Točan odgovor
  • The boiler should be kept clean.✓ Točan odgovor
  • Water washing should be performed regularly.
Allen, on board the Margrethe vessel, wants to run the engine down just before the cut-in level of its auxiliary blowers. What must he remember? Select the appropriate options and click Done.

Više točnih odgovora

  • He must monitor the exhaust gas temperature before and after the turbocharger.✓ Točan odgovor
  • He must run the engine above the cut-out level and then slowly reduce the engine power to run the engine just above the auxiliary blower cut-in level.✓ Točan odgovor
  • He must compare the vacuum pressure in the condenser with the design pressure.
  • He must set the load target to 100%.
David knows that the exhaust gas temperature for the Emma vessel should be 165°C or above to avoid the risk of sulphuric acid corrosion. However, as the ME load is low, the temperature of the exhaust gas is lower than 165°C. What should he do to avoid the risk of corrosion? Select the appropriate option and click Done.

Jedan točan odgovor

  • Decrease the set-point pressure of the HP steam section.
  • Increase the vacuum condenser pressure.
  • Increase the set-point pressure of the LP steam section.✓ Točan odgovor
The Chief Engineer onboard the Lima vessel wants to operate the WHR system at the beginning of a voyage. How should he manage the load depending on the status of the steam or power turbine? Drag and drop the ME load options into the correct placeholder and click Done.

Pitanje je dostupno u učenju i pretraživanju. Bez provjerenog ključa ne ulazi u ispit.

Izvorni podaci nemaju provjeren ključ odgovora

Izvorni elementi zadatka
  • Increase load
  • Decrease load
  • Increase load
  • Decrease load
James needs to perform soot blowing on board the Gudrun vessel. What should be sequence of the steps? Arrange the steps in the correct sequence by dragging them to the appropriate placeholders and click Done.

Pitanje je dostupno u učenju i pretraživanju. Bez provjerenog ključa ne ulazi u ispit.

Izvorni podaci nemaju provjeren ključ odgovora

Izvorni elementi zadatka
  • Blow soot from the LP section
  • Blow soot from the HP section
  • Again, blow soot from the LP section

Prije početka

Trebam li se registrirati prije početka?

Pristup za goste traje 23 minuta. Besplatno se registrirajte za nastavak, spremanje napretka i pregled pogrešaka.

Na kojem su jeziku pitanja?

Pitanja i ponuđeni odgovori ostaju na izvornom jeziku. Jezik sučelja možete promijeniti zasebno.

Mogu li koristiti rezultat kao službeni dokument?

Ne. Ovo je samostalna vježba. Rezultat ne zamjenjuje ispit, potvrdu ni provjeru znanja ovlaštene ustanove.