Svi međunarodni probni testovi na platformi IG MARITIME besplatni su za pomorce. Registrirajte se jednom da biste spremili napredak i vježbali bez ograničenja.

CD0416. Fuel oil bunkering, Understanding test results

Pretraži ovaj odjeljak

Odaberite skup pitanja i započnite učenje ili probni ispit.

O ovom skupu

U odjeljku Seagull CBT dostupna su pitanja za samostalnu pripremu. Odaberite skup pitanja za učenje ili probni ispit.

„Seagull CBT — CD0416. Fuel oil bunkering, Understanding test results” sadrži 22 pitanja u 1 skupova.

Učenje

Učenje nema vremenskog ograničenja. Nakon odgovora dobit ćete povratnu informaciju i točne opcije. Možete ponoviti pitanje ili temu.

Probni ispit

Probni ispit traje do 60 minuta i uključuje do 50 pitanja iz odabranog skupa. Rješenja i rezultati prikazuju se nakon završetka.

Primjeri pitanja i odgovora

Primjeri su iz objavljenog skupa. Odaberite učenje za vježbu redom ili probni ispit za provjeru znanja.

According to this module, if distillate fuel onboard is found to have a high Acid number, what should you do?

Jedan točan odgovor

  • Send a sample to a specialist testing agency to check for corrosion and/or chemical contamination.✓ Točan odgovor
  • Increase the rate of cylinder lubrication oil feed, and keep the main engine cooling water temperatures high.
  • Add an alkali to the fuel.
  • Water-wash the fuel using the separators.
Why are catalytic fines so problematic when present in residual fuel oil? Select the ONE correct answer.

Jedan točan odgovor

  • They are small and difficult to remove, but very hard and cause rapid wear of engine parts.✓ Točan odgovor
  • They cannot be burned and therefore lead to sticky deposits in the combustion chambers of the engine.
  • They are an indication that the fuel has not been completely refined and may therefore give poor combustion.
  • They are an indication that the fuel oil has been contaminated with other waste oils, such waste lubricating oil, which will give poor combustion.
Why is the Micro Carbon Residue of a distillate fuel important? Select the ONE correct answer.

Jedan točan odgovor

  • It is a measure of how much energy is released when the fuel is completely burned.
  • It is an indication of how likely it is that filters will be clogged, or need to be changed or back-flushed.
  • It is a measure of how abrasive the deposits left in the engine cylinder will be.
  • High levels result in more carbonaceous deposits in the engine.✓ Točan odgovor
The condition of distillate fuels can often be quickly assessed by a visual inspection of the sample, which should be bright and clear. At what temperature should this test be carried out? Select the ONE correct answer.

Jedan točan odgovor

  • Between 10 and 25 degrees Celsius.✓ Točan odgovor
  • The sample should be cooled to below 10 degrees Celsius.
  • The sample should be warmed to at least 30 degrees.
  • The sample should be warmed to within 10 degrees Celsius of its closed flash point.
According to this module, how should Type 2 and 3 ECA compliant fuels be treated? Select the ONE correct answer.

Jedan točan odgovor

  • They should be treated as residual heavy fuel oil of corresponding grade, particularly with regard to heating.✓ Točan odgovor
  • They should be treated as distillate fuels.
  • They should not be heated in storage.
  • They should not be centrifuged, as this causes the constituents to separate.

Prije početka

Trebam li se registrirati prije početka?

Pristup za goste traje 23 minuta. Besplatno se registrirajte za nastavak, spremanje napretka i pregled pogrešaka.

Na kojem su jeziku pitanja?

Pitanja i ponuđeni odgovori ostaju na izvornom jeziku. Jezik sučelja možete promijeniti zasebno.

Mogu li koristiti rezultat kao službeni dokument?

Ne. Ovo je samostalna vježba. Rezultat ne zamjenjuje ispit, potvrdu ni provjeru znanja ovlaštene ustanove.