Svi međunarodni probni testovi na platformi IG MARITIME besplatni su za pomorce. Registrirajte se jednom da biste spremili napredak i vježbali bez ograničenja.

CD0232. High Voltage, Equipment and testing

Pretraži ovaj odjeljak

Odaberite skup pitanja i započnite učenje ili probni ispit.

O ovom skupu

U odjeljku Seagull CBT dostupna su pitanja za samostalnu pripremu. Odaberite skup pitanja za učenje ili probni ispit.

„Seagull CBT — CD0232. High Voltage, Equipment and testing” sadrži 42 pitanja u 1 skupova.

Učenje

Učenje nema vremenskog ograničenja. Nakon odgovora dobit ćete povratnu informaciju i točne opcije. Možete ponoviti pitanje ili temu.

Probni ispit

Probni ispit traje do 60 minuta i uključuje do 50 pitanja iz odabranog skupa. Rješenja i rezultati prikazuju se nakon završetka.

Primjeri pitanja i odgovora

Primjeri su iz objavljenog skupa. Odaberite učenje za vježbu redom ili probni ispit za provjeru znanja.

Which one of the following best describes the action to take if the polarisation index calculated from insulation readings on a piece of high voltage equipment has risen by 35% in 6 months?

Jedan točan odgovor

  • The change should be investigated unless maintenance is known to be responsible for the rise✓ Točan odgovor
  • Pat yourself on the back for a good job done
  • Take the readings again, there must be a mistake
  • Send an e mail to the company telling them the new insulation meter is better than the old one
Which one of the following best describes the process of drawing up and implementing a switching plan when connecting or disconnecting high voltage electrical equipment?

Jedan točan odgovor

  • Anyone can draw up the switching plan but the authorised person must approve it✓ Točan odgovor
  • The authorised person must draw up the switching plan
  • The authorised person must draw up the switching plan but the chief engineer must approve the plan
  • The competent person must approve the switching plan
Which one of the following best describes why someone on a high voltage ship may want to use a ‘multilock’?

Jedan točan odgovor

  • Multilocks are used where more than one person wishes to ensure that a circuit breaker cannot be operated without their permission✓ Točan odgovor
  • Multilocks are used so all padlocks on circuit breakers can be opened by the same key
  • Multilocks are used where more than one size of circuit breaker is required to be locked using a standard size lock
  • Multilocks have long wires so that more than one switch can be locked off with a single lock
If isolation is not thorough, which of the following is the most dangerous stage in making a piece of high voltage electrical equipment safe to work on, according to this module?

Jedan točan odgovor

  • Earthing✓ Točan odgovor
  • Disconnection
  • Reconnection
  • Deading
With regard to the management of high voltage electrical systems, which one of the following best describes the difference between an ‘Authorised Person’ and a ‘Senior Authorised Person’, as stated in this module?

Jedan točan odgovor

  • An Authorised Person may have control over certain parts of the network with overall network control being held by a Senior Authorised Person✓ Točan odgovor
  • Only a certified Chief Engineer can be a Senior Authorised Person
  • Senior Authorised Persons need to reach the standards set out in STCW for electrical officers and Authorised Persons can be engineers
  • An Authorised Person can become a Senior Authorised Person after 18 months sea service

Prije početka

Trebam li se registrirati prije početka?

Pristup za goste traje 23 minuta. Besplatno se registrirajte za nastavak, spremanje napretka i pregled pogrešaka.

Na kojem su jeziku pitanja?

Pitanja i ponuđeni odgovori ostaju na izvornom jeziku. Jezik sučelja možete promijeniti zasebno.

Mogu li koristiti rezultat kao službeni dokument?

Ne. Ovo je samostalna vježba. Rezultat ne zamjenjuje ispit, potvrdu ni provjeru znanja ovlaštene ustanove.