Svi međunarodni probni testovi na platformi IG MARITIME besplatni su za pomorce. Registrirajte se jednom da biste spremili napredak i vježbali bez ograničenja.

CD0166. Separators, ALCAP Monitoring and control

Pretraži ovaj odjeljak

Odaberite skup pitanja i započnite učenje ili probni ispit.

O ovom skupu

U odjeljku Seagull CBT dostupna su pitanja za samostalnu pripremu. Odaberite skup pitanja za učenje ili probni ispit.

„Seagull CBT — CD0166. Separators, ALCAP Monitoring and control” sadrži 16 pitanja u 1 skupova.

Učenje

Učenje nema vremenskog ograničenja. Nakon odgovora dobit ćete povratnu informaciju i točne opcije. Možete ponoviti pitanje ili temu.

Probni ispit

Probni ispit traje do 60 minuta i uključuje do 50 pitanja iz odabranog skupa. Rješenja i rezultati prikazuju se nakon završetka.

Primjeri pitanja i odgovora

Primjeri su iz objavljenog skupa. Odaberite učenje za vježbu redom ili probni ispit za provjeru znanja.

Which of the following statements is correct?

Jedan točan odgovor

  • Electrical inputs connect to the left side of the control module.
  • Electrical inputs connect to the right side of the control module.✓ Točan odgovor
  • The transducer connects to terminals on the rear circuit board.
  • Electrical outputs connect to the left and right side of the front circuit board.
Which of the following statements is correct?

Jedan točan odgovor

  • The EPC 400 has 2 printed circuit cards to monitor ALCAP functions.
  • The EPC 400 monitors the transducer and co-ordinates the ALCAP functions with the operating sequence.✓ Točan odgovor
  • There are 4 different generations of EPC 400.
  • The EPC 400 can be adjusted to suit different operating voltages.
Before disconnecting any cables to the EPC 400 it should be isolated by?

Jedan točan odgovor

  • The EPC 400 only runs on 48 volts, it is not necessary to isolate.
  • Switching off the EPC with the fuse switch, located in the top left hand corner of the box.
  • Switching off the motor starter.
  • Switching off the electrical supply to the EPC.✓ Točan odgovor
What happens if you keep the alarm accept button pressed for more than 5 seconds?

Jedan točan odgovor

  • It is possible to display extra process conditions.
  • 32 previous alarms are displayed.
  • A ‘Lamp test’ of all LED’s.✓ Točan odgovor
  • A test of the alarm output to the central control room.
The fuses on the front circuit board are numbered from the top as?

Jedan točan odgovor

  • F1, F2 and F3
  • F2, F3 and F1
  • F3, F1 and F2
  • F2, F1 and F3✓ Točan odgovor
  • F3, F2 and F1

Prije početka

Trebam li se registrirati prije početka?

Pristup za goste traje 23 minuta. Besplatno se registrirajte za nastavak, spremanje napretka i pregled pogrešaka.

Na kojem su jeziku pitanja?

Pitanja i ponuđeni odgovori ostaju na izvornom jeziku. Jezik sučelja možete promijeniti zasebno.

Mogu li koristiti rezultat kao službeni dokument?

Ne. Ovo je samostalna vježba. Rezultat ne zamjenjuje ispit, potvrdu ni provjeru znanja ovlaštene ustanove.