Svi međunarodni probni testovi na platformi IG MARITIME besplatni su za pomorce. Registrirajte se jednom da biste spremili napredak i vježbali bez ograničenja.

CD0015. Corrosion Protection I

Pretraži ovaj odjeljak

Odaberite skup pitanja i započnite učenje ili probni ispit.

O ovom skupu

U odjeljku Seagull CBT dostupna su pitanja za samostalnu pripremu. Odaberite skup pitanja za učenje ili probni ispit.

„Seagull CBT — CD0015. Corrosion Protection I” sadrži 18 pitanja u 1 skupova.

Učenje

Učenje nema vremenskog ograničenja. Nakon odgovora dobit ćete povratnu informaciju i točne opcije. Možete ponoviti pitanje ili temu.

Probni ispit

Probni ispit traje do 60 minuta i uključuje do 50 pitanja iz odabranog skupa. Rješenja i rezultati prikazuju se nakon završetka.

Primjeri pitanja i odgovora

Primjeri su iz objavljenog skupa. Odaberite učenje za vježbu redom ili probni ispit za provjeru znanja.

What should be observed during application of convertible coating systems in cold weather?

Jedan točan odgovor

  • That the surface is dry
  • That sufficient curing time is allowed prior to application of the next coat
  • That sufficient curing time, above the minimum curing temperature of the coating, is allowed prior to application of the next coat.✓ Točan odgovor
  • The correct ambient temperature.
What should be observed during application of convertible coating systems in cold weather?

Jedan točan odgovor

  • That the surface is dry
  • That sufficient curing time is allowed prior to application of the next coat
  • That sufficient curing time, above the minimum curing temperature of the coating, is allowed prior to application of the next coat.✓ Točan odgovor
  • The correct ambient temperature.
What is the main single factor, which affects the cost of preparation and application to difficult vessel areas?

Jedan točan odgovor

  • The specialised labour required
  • The cost of the paint
  • The cost of access to an area✓ Točan odgovor
  • The Weather condition
What type of corrosion on a coated deck-area would you most worry about?

Jedan točan odgovor

  • 3% scattered corrosion✓ Točan odgovor
  • 6% localised corrosion
  • 1% localised pitting corrosion
  • Localised damage corrosion
What are the most important things to monitor when inspecting coating conditions?

Jedan točan odgovor

  • Inspect the areas only where coating has broken down
  • Inspect a typical area where you can access easily
  • Inspect both intact and corroded areas and also inspect angles, corners, behind bars etc.✓ Točan odgovor
  • Inspect suspected areas only.

Prije početka

Trebam li se registrirati prije početka?

Pristup za goste traje 23 minuta. Besplatno se registrirajte za nastavak, spremanje napretka i pregled pogrešaka.

Na kojem su jeziku pitanja?

Pitanja i ponuđeni odgovori ostaju na izvornom jeziku. Jezik sučelja možete promijeniti zasebno.

Mogu li koristiti rezultat kao službeni dokument?

Ne. Ovo je samostalna vježba. Rezultat ne zamjenjuje ispit, potvrdu ni provjeru znanja ovlaštene ustanove.