Svi međunarodni probni testovi na platformi IG MARITIME besplatni su za pomorce. Registrirajte se jednom da biste spremili napredak i vježbali bez ograničenja.

CD0014. Vessel Struct. Cond.

Pretraži ovaj odjeljak

Odaberite skup pitanja i započnite učenje ili probni ispit.

O ovom skupu

U odjeljku Seagull CBT dostupna su pitanja za samostalnu pripremu. Odaberite skup pitanja za učenje ili probni ispit.

„Seagull CBT — CD0014. Vessel Struct. Cond.” sadrži 58 pitanja u 1 skupova.

Učenje

Učenje nema vremenskog ograničenja. Nakon odgovora dobit ćete povratnu informaciju i točne opcije. Možete ponoviti pitanje ili temu.

Probni ispit

Probni ispit traje do 60 minuta i uključuje do 50 pitanja iz odabranog skupa. Rješenja i rezultati prikazuju se nakon završetka.

Primjeri pitanja i odgovora

Primjeri su iz objavljenog skupa. Odaberite učenje za vježbu redom ili probni ispit za provjeru znanja.

With reference to static and dynamic forces acting on the hull, which one of the following statements is most accurate?

Jedan točan odgovor

  • High static forces, for instance due to poor cargo loading, mean that the vessel is less safe when operating in heavy weather✓ Točan odgovor
  • Provided the maximum static loading for the hull has not been exceeded, the vessel should be safe in any weather conditions
  • Dynamic loads on the vessel are insignificant compared to the weight of cargo and ballast
  • Static forces on the vessel are insignificant compared to sea forces
Which one of the following statements is most accurate?

Jedan točan odgovor

  • The highest forces due to wave action occur when the distance between wave crests is equal to half the length of the ship
  • The highest forces due to wave action occur when the distance between wave crests is equal to twice the length of the ship.
  • The highest forces due to wave action occur when the distance between wave crests is equal to one quarter of the length of the ship.
  • The highest forces due to wave action occur when the distance between wave crests is equal to the length of the ship.✓ Točan odgovor
For an evenly loaded built-in beam, which one of the following statements is most accurate?

Jedan točan odgovor

  • The bending stress is zero at mid length
  • The bending stress is zero at the ends
  • The bending stress is high at mid length and at the ends✓ Točan odgovor
  • Bending stress is zero along the whole length
Which one of the following statements about forces on the hull is most accurate?

Jedan točan odgovor

  • Shear forces on the hull will tend to be high if one hold is fully loaded and the next is empty✓ Točan odgovor
  • Shear forces on the hull will be tend to be high if all holds are evenly loaded
  • Shear forces on the hull will tend to be high if all holds are empty
  • Shear forces on the hull will tend to be low if one hold is fully loaded and the next is empty
Which one of these IMO publications requires that Bulk Carriers have a loading instrument?

Jedan točan odgovor

  • Load line
  • COLREG
  • SOLAS✓ Točan odgovor
  • MARPOL

Prije početka

Trebam li se registrirati prije početka?

Pristup za goste traje 23 minuta. Besplatno se registrirajte za nastavak, spremanje napretka i pregled pogrešaka.

Na kojem su jeziku pitanja?

Pitanja i ponuđeni odgovori ostaju na izvornom jeziku. Jezik sučelja možete promijeniti zasebno.

Mogu li koristiti rezultat kao službeni dokument?

Ne. Ovo je samostalna vježba. Rezultat ne zamjenjuje ispit, potvrdu ni provjeru znanja ovlaštene ustanove.