Svi međunarodni probni testovi na platformi IG MARITIME besplatni su za pomorce. Registrirajte se jednom da biste spremili napredak i vježbali bez ograničenja.

Introduction to Abrasive Wheels

Pretraži ovaj odjeljak

Odaberite skup pitanja i započnite učenje ili probni ispit.

O ovom skupu

U odjeljku MINTRA CET dostupna su pitanja za samostalnu pripremu. Odaberite skup pitanja za učenje ili probni ispit.

„MINTRA CET — Introduction to Abrasive Wheels” sadrži 10 pitanja u 1 skupova.

Učenje

Učenje nema vremenskog ograničenja. Nakon odgovora dobit ćete povratnu informaciju i točne opcije. Možete ponoviti pitanje ili temu.

Probni ispit

Probni ispit traje do 60 minuta i uključuje do 50 pitanja iz odabranog skupa. Rješenja i rezultati prikazuju se nakon završetka.

Primjeri pitanja i odgovora

Primjeri su iz objavljenog skupa. Odaberite učenje za vježbu redom ili probni ispit za provjeru znanja.

Which of the following types of abrasive wheel has a long, wide surface with no centre mounting support or hollow?

Jedan točan odgovor

  • Cylinder wheel.✓ Točan odgovor
  • Tapered wheel.
  • Saucer wheel.
  • Straight wheel.
There are several steps that must be undertaken before beginning grinding operations:

Jedan točan odgovor

  • Step 1: “Sound” the wheel (if appropriate); Step 2: Ensure the wheel is properly clamped to the machine; Step 3: “Dress” and “True” the wheel.✓ Točan odgovor
  • Step 1: “Dress” and “True” the wheel; Step 2: Ensure the wheel is properly clamped to the machine; Step 3: “Sound” the wheel (if appropriate).
  • Step 1: Ensure the wheel is properly clamped to the machine; Step 2: “Dress” and “True” the wheel; Step 3: “Sound” the wheel (if appropriate).
Abrasive wheels are bonded together using ____ or inorganic substances, such as ____ to form a solid circular shape. However, unlike a saw, which has teeth only on its edge, the grinding wheel has abrasive grains distributed ____ the wheel. Thousands of these hard, tough ____ move against the work-piece to cut away tiny chips of material.

Jedan točan odgovor

  • … organic … resin … saw … throughout … grains.✓ Točan odgovor
  • … inorganic … oil … saw … grains … throughout.
Which of the following are precautions that must be taken when using portable grinding equipment?

Više točnih odgovora

  • Wheel Flaking.✓ Točan odgovor
  • Slow Grinding Speed.✓ Točan odgovor
  • Fast Grinding Speed.
  • Wheel “Perspiring”.
  • Excessive Run-out or “Wobble”.✓ Točan odgovor
  • Rapid Disc Wear/Short Blade Life.✓ Točan odgovor
Select the statements which identify safe working practices for the use of abrasive wheels.

Više točnih odgovora

  • To minimise the risk of bursting, abrasive wheels should always be run within the specified maximum rotation speed.✓ Točan odgovor
  • If a wheel is large enough the maximum rotation speed will be marked on the wheel.✓ Točan odgovor
  • Guards must be provided (on all types of wheel) to contain fragments that may fly off if the wheel bursts.✓ Točan odgovor
  • Relevant information and training should be provided to all personnel involved in the use of grinding operations.✓ Točan odgovor
  • For smaller wheels there should be a notice highlighting the maximum speed for each size of wheel.✓ Točan odgovor
  • Guards must be provided (on pedestal grinders only) to contain fragments that may fly off if the wheel burst.
  • Wheel rotation speeds (for all size of wheel) must be displayed on a notice.

Prije početka

Trebam li se registrirati prije početka?

Pristup za goste traje 23 minuta. Besplatno se registrirajte za nastavak, spremanje napretka i pregled pogrešaka.

Na kojem su jeziku pitanja?

Pitanja i ponuđeni odgovori ostaju na izvornom jeziku. Jezik sučelja možete promijeniti zasebno.

Mogu li koristiti rezultat kao službeni dokument?

Ne. Ovo je samostalna vježba. Rezultat ne zamjenjuje ispit, potvrdu ni provjeru znanja ovlaštene ustanove.