Svi međunarodni probni testovi na platformi IG MARITIME besplatni su za pomorce. Registrirajte se jednom da biste spremili napredak i vježbali bez ograničenja.

Odaberite skup pitanja i započnite učenje ili probni ispit.

O ovom skupu

U odjeljku Furuno ECDIS dostupna su pitanja za samostalnu pripremu. Odaberite skup pitanja za učenje ili probni ispit.

„Furuno ECDIS — FMD 3x00 v4.0 — Safety Settings” sadrži 13 pitanja u 1 skupova.

Učenje

Učenje nema vremenskog ograničenja. Nakon odgovora dobit ćete povratnu informaciju i točne opcije. Možete ponoviti pitanje ili temu.

Probni ispit

Probni ispit traje do 60 minuta i uključuje do 50 pitanja iz odabranog skupa. Rješenja i rezultati prikazuju se nakon završetka.

Primjeri pitanja i odgovora

Primjeri su iz objavljenog skupa. Odaberite učenje za vježbu redom ili probni ispit za provjeru znanja.

How is the Safety Contour always displayed in the charts - regardless of the setting of two colour or four shades?

Jedan točan odgovor

  • As an area with a light blue colour.
  • As an area with a dark blue colour.
  • As an area with a light grey colour.
  • As a thick grey line.✓ Točan odgovor
What is the maximum limit of the Look-ahead function?

Jedan točan odgovor

  • There is no limit.
  • 120min. + 10NM + 3km + 500m.
  • 999min. + 999NM + 999km + 999m.
  • 20 NM + 240 min + 5km + 999m.✓ Točan odgovor
Where do you adjust the size of the chart watch sector that can be used to scan the ENCs for problems along own ship's course line?

Jedan točan odgovor

  • In Chart Display settings.
  • In Chart Alert settings.
  • In Basic settings.
  • In the Look-ahead settings.✓ Točan odgovor
What is the Filter in the FURUNO ECDIS?

Jedan točan odgovor

  • The Filter is a noise filter which improves the precision of the charts.
  • The Filter is a process filter which reduces the time it takes for the ECDIS to start up.
  • The Filter is a software function which continuously monitors the integrity of the navigation sensor data input in the ECDIS.✓ Točan odgovor
  • The Filter is a filter which continuously monitors the connections to the RADAR - the GPS - and the AIS.
What is the Safety Contour setting in the route planning tool used for?

Jedan točan odgovor

  • Nothing - it is an informative setting only.
  • It is used as the monitored value of the Safety Contour for the Chart Alert and the Look Ahead functions when the ECDIS is operated in Voyage planning mode.
  • It is used for checking the air draft when sailing beneath bridges power lines etc..
  • It is used for the route plan check that is performed when planning a route.✓ Točan odgovor

Prije početka

Trebam li se registrirati prije početka?

Pristup za goste traje 23 minuta. Besplatno se registrirajte za nastavak, spremanje napretka i pregled pogrešaka.

Na kojem su jeziku pitanja?

Pitanja i ponuđeni odgovori ostaju na izvornom jeziku. Jezik sučelja možete promijeniti zasebno.

Mogu li koristiti rezultat kao službeni dokument?

Ne. Ovo je samostalna vježba. Rezultat ne zamjenjuje ispit, potvrdu ni provjeru znanja ovlaštene ustanove.