Svi međunarodni probni testovi na platformi IG MARITIME besplatni su za pomorce. Registrirajte se jednom da biste spremili napredak i vježbali bez ograničenja.

MCQ: Flameproof Ex d

Pretraži ovaj odjeljak

Odaberite skup pitanja i započnite učenje ili probni ispit.

O ovom skupu

U odjeljku CompEx dostupna su pitanja za samostalnu pripremu. Odaberite skup pitanja za učenje ili probni ispit.

„CompEx — MCQ: Flameproof Ex d” sadrži 26 pitanja u 1 skupova.

Učenje

Učenje nema vremenskog ograničenja. Nakon odgovora dobit ćete povratnu informaciju i točne opcije. Možete ponoviti pitanje ili temu.

Probni ispit

Probni ispit traje do 60 minuta i uključuje do 50 pitanja iz odabranog skupa. Rješenja i rezultati prikazuju se nakon završetka.

Primjeri pitanja i odgovora

Primjeri su iz objavljenog skupa. Odaberite učenje za vježbu redom ili probni ispit za provjeru znanja.

A function (live) test on a flameproof enclosure after some internal adjustments requires which one of the following as minimum requirement?

Jedan točan odgovor

  • Fit only the corner bolts and apply a "Danger Live" notice
  • All bolts to be replaced- spanner tight- and flamepath gaps checked✓ Točan odgovor
  • Only one bolt fitted to support the cover and a :Danger Live" notice
  • Leave cover off, apply a "Danger Live" notice and make sure inadvertent contact with live parts is avoided
2) Which one of the following may be applied in the gap of a flameproof flanged joint to improve the IP rating?

Jedan točan odgovor

  • (I) Thermosetting sealant;
  • (II) Non setting grease;✓ Točan odgovor
  • (III) Non-hardening grease bearing textile tape;
  • (IV) Any oil based paint.
Fitting new (metric thread) cable glands to older flameproof equipment, with imperial thread forms at cable gland entries, may be achieved by?

Jedan točan odgovor

  • Re-tapping the entries using a metric tap the same size as the gland
  • Using an Exd adaptor with appropriate thread forms✓ Točan odgovor
  • Fitting threaded inserts after drilling
  • Fitting the metric glamd as far as possible with the aim of achieving five-full threads engagement
11) One of the design features of flameproof enclosures is?

Jedan točan odgovor

  • (I) Electric field strength;
  • (II) A gas detector and alarm arrangement;
  • (III) Flanged and/or spigot joints;✓ Točan odgovor
  • (IV) An IP67 ingress protection level.
Obstruction of the flamepath openings of the flanged joints of Ex d enclosure by solid obstructions requires minimum clearance depending on the equipment group. For a IIC enclosure this not less than?

Jedan točan odgovor

  • 30 mm
  • 40 mm✓ Točan odgovor
  • 10 mm
  • 50 mm

Prije početka

Trebam li se registrirati prije početka?

Pristup za goste traje 23 minuta. Besplatno se registrirajte za nastavak, spremanje napretka i pregled pogrešaka.

Na kojem su jeziku pitanja?

Pitanja i ponuđeni odgovori ostaju na izvornom jeziku. Jezik sučelja možete promijeniti zasebno.

Mogu li koristiti rezultat kao službeni dokument?

Ne. Ovo je samostalna vježba. Rezultat ne zamjenjuje ispit, potvrdu ni provjeru znanja ovlaštene ustanove.