Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD7003. TOTS 1A-Mooring Equipment and Operations

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 58 tanong sa 1 pangkat ang “Seagull CBT — CD7003. TOTS 1A-Mooring Equipment and Operations”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

Is it acceptable to travel at the speed of four knots in the approach to the berth?

Isang tamang sagot

  • It's too fast.✓ Tamang sagot
  • It's normal.
  • It's sufficient for manoeuvring.
  • It is up to the Pilot to decide.
What is the recommended procedure if your vessel is equipped with "self-stowing automatic tension" winches and your vessel is moored alongside the loading jetty with fixed loading arms?

Isang tamang sagot

  • All mooring ropes should be left secured by the manual mooring brakes and all winches should be left out of gear.✓ Tamang sagot
  • All winches should be kept in "auto-tension" mode.
  • Head and stern line winches should be kept in "auto-tension" mode and breast and spring ropes should be kept manually secured by brakes.
  • Spring line winches should be kept in "auto-tension" mode and all other ropes should be kept secured by manual brakes.
What is it important to discuss during the pre-berthing briefing between the Master and the ship's officers?

Isang tamang sagot

  • The specific berthing operation for the forthcoming berthing, the use of tugs and the position of the mooring ropes/wires to be used.✓ Tamang sagot
  • Which officer will be on the forecastle and which on the stern during mooring operations.
  • The size (pulling power) of the tugs to be used during berthing.
  • How many crew members should be called for berthing operations.
What is an advantage of split-type mooring drums?

Isang tamang sagot

  • All three answers.✓ Tamang sagot
  • The mooring wires are not "crushed" under load.
  • There is a smaller chance that the mooring rope will be "jammed" on the storage part of reel.
  • The use of the split drum uses the winch braking capacity to its maximum.
When should the emergency towing wires (fire wires) be deployed?

Isang tamang sagot

  • When the vessel is berthed at the terminals and tugs are available.✓ Tamang sagot
  • Only on terminals where the vessel is secured alongside the jetty.
  • Whenever the vessel is not in navigation.
  • Whenever the vessel is anchored or berthed at the terminals.

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.