Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD0360. Crude oil tankers, Control of flow rates during loading

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 14 tanong sa 1 pangkat ang “Seagull CBT — CD0360. Crude oil tankers, Control of flow rates during loading”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

According to SOLAS, who should control closing and opening of the valves on the inert gas distribution line? Select the ONE correct answer.

Isang tamang sagot

  • The officer in charge of the cargo transfer✓ Tamang sagot
  • The Master, or the appointed deputy if ashore
  • The duty rating when checking for cargo leaks on deck
  • The Chief Engineer or the appointed deputy
During loading, which of the following must be monitored particularly closely while venting through a terminal’s vapour return line? Select the TWO correct answers.

Maraming tamang sagot

  • Cargo tank vapour pressure✓ Tamang sagot
  • Cargo loading rate✓ Tamang sagot
  • Cargo vapour temperature increase
  • Vapour growth in the cargo tank
Which of the following factors are used to determine the size and venting capacity of a cargo oil tank pressure-vacuum valve? Select the TWO best answers.

Maraming tamang sagot

  • The design loading rate✓ Tamang sagot
  • Vapour growth during loading✓ Tamang sagot
  • The height of the pressure-vacuum valve above the deck
  • The horizontal distance between the inert gas inlet and the pressure/vacuum valve
How can the contents of a cargo tank that is not being loaded be checked to see whether or not the ullage is changing during loading? Select the TWO best answers.

Maraming tamang sagot

  • Set the high and low level alarm close to either side of the ullage of the tank and monitor closely✓ Tamang sagot
  • Check that any ullage change can be explained by changes in trim, list or temperature✓ Tamang sagot
  • Check that the loading rate for the tank is always shown as zero on the on-line loading instrument
  • Check to see that the ullage remains constant; any change would indicate tank leakage
During loading, there is a small but continuous change in the ullage of a filled tank not involved in the loading operation. What is the most likely cause? Select the ONE best answer.

Isang tamang sagot

  • The hydraulic suction valve for the tank has crept open very slightly✓ Tamang sagot
  • There has been an increase in cargo temperature
  • There has been a change of trim
  • There has been a change of list

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.