Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD0345. Hull structural strength

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 45 tanong sa 1 pangkat ang “Seagull CBT — CD0345. Hull structural strength”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

Which of the following most accurately describes a disadvantage of High Tensile Steel used in ship structures? Select the ONE best answer

Isang tamang sagot

  • When corrosion occurs, the rate of loss of strength is more than for ordinary mild steel✓ Tamang sagot
  • It is more expensive
  • It is heavier than mild steel
  • It is more prone to corrosion
Which ONE of the following statements about hull inspections is most accurate?

Isang tamang sagot

  • Ship’s crew should regularly inspect the cargo holds, hatch covers and ballast tanks with a view to detecting damage and defects✓ Tamang sagot
  • Ship’s crew are not allowed to inspect the cargo holds, hatch covers and ballast tanks
  • There is no need to detect damage and defects between surveys
  • Ship’s crew have insufficient training to inspect the cargo holds, hatch covers and ballast tanks with a view to detecting damage and defects.
Which one of the following best describes why bulk carriers are more prone to corrosion than tankers or container ships? Select the ONE best answer.

Isang tamang sagot

  • Bulk carriers suffer much more mechanical damage to coatings due to grab damage and other impacts during loading and discharging✓ Tamang sagot
  • They spend more time in port
  • Tankers and container ships have higher technology coating systems applied to their cargo carrying spaces
  • Bulk carriers are built of lower grades of steel
With regard to shear forces acting on the hull, which ONE of the following statements is most accurate?

Isang tamang sagot

  • Shear force is created when there are two parallel, opposite forces, like gravity and buoyancy✓ Tamang sagot
  • Shear force is created when there are two parallel forces in the same direction, like gravity and buoyancy
  • Shear force refers to the horizontal force at the forward part of the vessel
  • Shear force refers to the horizontal force at the aft part of the vessel
With reference to looking for defects in the hull structure, which ONE of the following statements is most accurate?

Isang tamang sagot

  • Indentations in the side and floor plating of Bulk carriers from cargo work can lead to corrosion and cracking✓ Tamang sagot
  • Indentations in the side and floor plating of Bulk carriers from cargo work are usually of no great importance
  • Large hatch openings on container and bulk vessels do not form part of the structure and therefore do not need close inspection
  • Double bottom tanks are not usually subject to corrosion

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.