Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD0166. Separators, ALCAP Monitoring and control

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 16 tanong sa 1 pangkat ang “Seagull CBT — CD0166. Separators, ALCAP Monitoring and control”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

Which of the following statements is correct?

Isang tamang sagot

  • Electrical inputs connect to the left side of the control module.
  • Electrical inputs connect to the right side of the control module.✓ Tamang sagot
  • The transducer connects to terminals on the rear circuit board.
  • Electrical outputs connect to the left and right side of the front circuit board.
Which of the following statements is correct?

Isang tamang sagot

  • The EPC 400 has 2 printed circuit cards to monitor ALCAP functions.
  • The EPC 400 monitors the transducer and co-ordinates the ALCAP functions with the operating sequence.✓ Tamang sagot
  • There are 4 different generations of EPC 400.
  • The EPC 400 can be adjusted to suit different operating voltages.
Before disconnecting any cables to the EPC 400 it should be isolated by?

Isang tamang sagot

  • The EPC 400 only runs on 48 volts, it is not necessary to isolate.
  • Switching off the EPC with the fuse switch, located in the top left hand corner of the box.
  • Switching off the motor starter.
  • Switching off the electrical supply to the EPC.✓ Tamang sagot
What happens if you keep the alarm accept button pressed for more than 5 seconds?

Isang tamang sagot

  • It is possible to display extra process conditions.
  • 32 previous alarms are displayed.
  • A ‘Lamp test’ of all LED’s.✓ Tamang sagot
  • A test of the alarm output to the central control room.
The fuses on the front circuit board are numbered from the top as?

Isang tamang sagot

  • F1, F2 and F3
  • F2, F3 and F1
  • F3, F1 and F2
  • F2, F1 and F3✓ Tamang sagot
  • F3, F2 and F1

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.