Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD0152. Hatch Cover Maintenance - Bulk Carrier

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 107 tanong sa 1 pangkat ang “Seagull CBT — CD0152. Hatch Cover Maintenance - Bulk Carrier”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

You are carrying out maintenance on number 3 hatch cover. The permanent set has reached half the design compression in places and there are signs of wear. You have cut out two metres of bad seal along the port side. What length of rubber will you actually cut to insert in its place?

Isang tamang sagot

  • 2.06 m✓ Tamang sagot
  • 2 m
  • 1.94 m
  • 2.03 m
  • 1.97 m
In a four-panel arrangement, the cylinders are operated once the cleats are all released, causing the first, or “leading” pair of panels to peak. At this time, what is happening to the second pair of panels?

Isang tamang sagot

  • The wheels of the “trailing pair” roll up onto their trackways✓ Tamang sagot
  • They are also “peaking” in parallel
  • Nothing is happening to the second pair of panels. They are totally independent
  • The third panel is raised at 45 degrees and the fourth is about to begin elevating
The immediate effects of improper penetration into the hatch seal by the compression bar are shown below. Drag and drop the applicable effect onto the corresponding type of improper penetration.Hindi available ang orihinal na larawan.

Makikita ito sa pag-aaral at paghahanap. Hindi ito kasama sa pagsusulit kapag walang napagtibay na sagot.

Walang napagtibay na sagot sa orihinal na datos

Mga orihinal na bahagi ng tanong
  • Damage to the seal rubber and rapid failure of the seal
  • Seawater can get past the seal
What will an inspection prior to discharge primarily establish?

Isang tamang sagot

  • Whether the measures taken in sealing the hatch after loading were successful✓ Tamang sagot
  • Whether there is any damage to the hatch cover panels
  • Whether there is any damage to the trackway
  • Whether the checklist completed after loading was correctly filled out
  • Whether the hatch was closed properly
  • Whether there was unusually heavy weather on passage
When replacing the straight pieces of a hatch seal, what is the recommended additional percentage to be allowed when cutting?

Isang tamang sagot

  • 3 %✓ Tamang sagot
  • None, it should be cut to the exact length required
  • 1 %
  • 5 %
  • It should be undercut by 3 % and stretched during fitting

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.