Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD0130. LRM - IHI GTC

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 61 tanong sa 1 pangkat ang “Seagull CBT — CD0130. LRM - IHI GTC”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

All inspections, other than weekly and monthly and any servicing and repair, other than routine, should be conducted by which of the following persons?

Isang tamang sagot

  • The Master.
  • A manufacturer’s representative or a person appropriately trained and certified by the manufacturer for the work to be done.✓ Tamang sagot
  • A Company Superintendent.
  • A senior officer or a fitter suitable qualified and holding a certificate in lifeboat maintenance.
Which face of the D-shaped cam pin should be in contact with the locking-plate when it is in the closed postion?

Isang tamang sagot

  • The flat face.
  • The curved face.✓ Tamang sagot
How is the D-shaped cam pin turned back into position under the locking plate during resetting?

Isang tamang sagot

  • By manually lifting the cam reset lever.✓ Tamang sagot
  • By the hook pressing against the locking plate.
  • By re-engaging the stopper lever.
  • By pushing the remote release handle back into position.
Which of the following components is spring-loaded?

Isang tamang sagot

  • The remote release handle.
  • The after hook.
  • The D-shaped cam pin.
  • The stopper lever.✓ Tamang sagot
An “on-load release mechanism” is defined as:

Isang tamang sagot

  • one that can be released at any time from any height.
  • one designed to be operated when the boat is hanging in the falls at an approximate height of 2-3 metres above the water.
  • one designed to be operated when the boat has been lowered and is waterborne, whether or not a load is being applied to it by the action of the ship or the sea.✓ Tamang sagot
  • one designed to be operated when the load applied to them is removed – that is, when the boat has been lowered and is waterborne.

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.