Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD0041. Generator

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 34 tanong sa 1 pangkat ang “Seagull CBT — CD0041. Generator”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

Which control mode is recommended during manoeuvring?

Isang tamang sagot

  • Optimal, because this mode allows an increased load of the generators during manoeuvring
  • Equal, because of the wider control range which allows the low priority generator(s) to be connected at low loads✓ Tamang sagot
  • Cyclic, because the risk of fouling of intake channels are eliminated, and because of this the risks of reduced capacity of the generators are minimised
What will happen if Load dependent start/stop of generator sets is in auto mode?

Isang tamang sagot

  • It will start/stop the generator sets in response to varying load✓ Tamang sagot
  • It will start/stop the generator sets in response to fuel consumption
  • It will start but never stop the generator sets in response to varying load
  • It will stop but never start the generator sets in response to varying load
The kW and kVAr instruments on the main switchboard reads respectively 630 kW and 400 kVAr. What is the actual power factor?

Isang tamang sagot

  • 0.8
  • 0.85✓ Tamang sagot
  • 0.9
How could you monitor the correct instant for synchronising without the aid of a synchroscope or synchronising lamps?

Isang tamang sagot

  • By connecting a pair of voltmeter probes across one phase of the incoming generator circuit breaker, and then adjusting the generator speed until the voltmeter slowly fluctuates from zero to maximum. Connect the breaker when the voltmeter passes through zero✓ Tamang sagot
  • It is not possible to synchronise generators without the synchronising aids
  • By off-loading the running generator to a minimum to avoid large "kicks" at connection. Adjust the incoming generator to a frequency slightly less than the running generator. The running generator will then "pull" the incoming generator into synchronism
Which statement is true?

Isang tamang sagot

  • The Priority 1 generator will be first IN / first OUT
  • The Priority 1 generator will be first IN / last OUT✓ Tamang sagot
  • At Cyclic control mode the generators change Priority order

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.