Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD0016. Corrosion Protection II

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 26 tanong sa 1 pangkat ang “Seagull CBT — CD0016. Corrosion Protection II”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

The wet film of paint, which is applied, bears a direct relationship to the final dry film thickness of the coating. Taking wet film measurements can be very important. Why is it important to take these measurements as quickly as possible?

Isang tamang sagot

  • To avoid the fresh coat softening the coats underneath leading to possible wrong readings.
  • So that the painter is disturbed as little as possible.
  • To obtain as close a reading to the actual wet film as possible.✓ Tamang sagot
Which of the following statements best describes one of the main advantages of Hydroblasting with fresh water as opposed to Dry Abrasive Blasting?

Isang tamang sagot

  • Produces a Surface Profile to aid adhesion of coatings to the surface.
  • Only requires air power for operation.
  • As well as removing corrosion products it also removes salt contamination.✓ Tamang sagot
  • The prepared surfaces will flash rust.
A large area of exposed deck is to be blasted to an agreed standard of SA2 before application of an epoxy paint system. In the vicinity of some pipes where difficult access means that the blasting is not able to remove all the corrosion. What do you do?

Isang tamang sagot

  • Reject the whole blasted areas until blasting is redone to the correct SA2 standard.
  • Accept the blasted areas and go ahead with painting.
  • Discuss the various options with the contractor.✓ Tamang sagot
Which are the 3 factors, which help contribute to correct performance of a paint system.

Maraming tamang sagot

  • The Paint itself✓ Tamang sagot
  • The Correct Specification
  • The Correct Intervals between coats of paint
  • That clean Airless spray equipment is used
  • Proper Surface Preparation✓ Tamang sagot
  • The amount of Time and Money spent on the paint and the application
  • Proper Application of Paint✓ Tamang sagot
A large area of exposed deck is to be blasted to an agreed standard of SA2 before application of an epoxy paint system. In the vicinity of some pipes where difficult access means that the blasting is not able to remove all the corrosion. What do you do?

Isang tamang sagot

  • Reject the whole blasted areas until blasting is redone to the correct SA2 standard.
  • Accept the blasted areas and go ahead with painting.
  • Discuss the various options with the contractor.✓ Tamang sagot

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.