Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD0015. Corrosion Protection I

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 18 tanong sa 1 pangkat ang “Seagull CBT — CD0015. Corrosion Protection I”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

What should be observed during application of convertible coating systems in cold weather?

Isang tamang sagot

  • That the surface is dry
  • That sufficient curing time is allowed prior to application of the next coat
  • That sufficient curing time, above the minimum curing temperature of the coating, is allowed prior to application of the next coat.✓ Tamang sagot
  • The correct ambient temperature.
What should be observed during application of convertible coating systems in cold weather?

Isang tamang sagot

  • That the surface is dry
  • That sufficient curing time is allowed prior to application of the next coat
  • That sufficient curing time, above the minimum curing temperature of the coating, is allowed prior to application of the next coat.✓ Tamang sagot
  • The correct ambient temperature.
What is the main single factor, which affects the cost of preparation and application to difficult vessel areas?

Isang tamang sagot

  • The specialised labour required
  • The cost of the paint
  • The cost of access to an area✓ Tamang sagot
  • The Weather condition
What type of corrosion on a coated deck-area would you most worry about?

Isang tamang sagot

  • 3% scattered corrosion✓ Tamang sagot
  • 6% localised corrosion
  • 1% localised pitting corrosion
  • Localised damage corrosion
What are the most important things to monitor when inspecting coating conditions?

Isang tamang sagot

  • Inspect the areas only where coating has broken down
  • Inspect a typical area where you can access easily
  • Inspect both intact and corroded areas and also inspect angles, corners, behind bars etc.✓ Tamang sagot
  • Inspect suspected areas only.

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.