Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

CD0014. Vessel Struct. Cond.

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Seagull CBT para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 58 tanong sa 1 pangkat ang “Seagull CBT — CD0014. Vessel Struct. Cond.”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

With reference to static and dynamic forces acting on the hull, which one of the following statements is most accurate?

Isang tamang sagot

  • High static forces, for instance due to poor cargo loading, mean that the vessel is less safe when operating in heavy weather✓ Tamang sagot
  • Provided the maximum static loading for the hull has not been exceeded, the vessel should be safe in any weather conditions
  • Dynamic loads on the vessel are insignificant compared to the weight of cargo and ballast
  • Static forces on the vessel are insignificant compared to sea forces
Which one of the following statements is most accurate?

Isang tamang sagot

  • The highest forces due to wave action occur when the distance between wave crests is equal to half the length of the ship
  • The highest forces due to wave action occur when the distance between wave crests is equal to twice the length of the ship.
  • The highest forces due to wave action occur when the distance between wave crests is equal to one quarter of the length of the ship.
  • The highest forces due to wave action occur when the distance between wave crests is equal to the length of the ship.✓ Tamang sagot
For an evenly loaded built-in beam, which one of the following statements is most accurate?

Isang tamang sagot

  • The bending stress is zero at mid length
  • The bending stress is zero at the ends
  • The bending stress is high at mid length and at the ends✓ Tamang sagot
  • Bending stress is zero along the whole length
Which one of the following statements about forces on the hull is most accurate?

Isang tamang sagot

  • Shear forces on the hull will tend to be high if one hold is fully loaded and the next is empty✓ Tamang sagot
  • Shear forces on the hull will be tend to be high if all holds are evenly loaded
  • Shear forces on the hull will tend to be high if all holds are empty
  • Shear forces on the hull will tend to be low if one hold is fully loaded and the next is empty
Which one of these IMO publications requires that Bulk Carriers have a loading instrument?

Isang tamang sagot

  • Load line
  • COLREG
  • SOLAS✓ Tamang sagot
  • MARPOL

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.