Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

Introduction to Abrasive Wheels

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa MINTRA CET para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 10 tanong sa 1 pangkat ang “MINTRA CET — Introduction to Abrasive Wheels”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

Which of the following types of abrasive wheel has a long, wide surface with no centre mounting support or hollow?

Isang tamang sagot

  • Cylinder wheel.✓ Tamang sagot
  • Tapered wheel.
  • Saucer wheel.
  • Straight wheel.
There are several steps that must be undertaken before beginning grinding operations:

Isang tamang sagot

  • Step 1: “Sound” the wheel (if appropriate); Step 2: Ensure the wheel is properly clamped to the machine; Step 3: “Dress” and “True” the wheel.✓ Tamang sagot
  • Step 1: “Dress” and “True” the wheel; Step 2: Ensure the wheel is properly clamped to the machine; Step 3: “Sound” the wheel (if appropriate).
  • Step 1: Ensure the wheel is properly clamped to the machine; Step 2: “Dress” and “True” the wheel; Step 3: “Sound” the wheel (if appropriate).
Abrasive wheels are bonded together using ____ or inorganic substances, such as ____ to form a solid circular shape. However, unlike a saw, which has teeth only on its edge, the grinding wheel has abrasive grains distributed ____ the wheel. Thousands of these hard, tough ____ move against the work-piece to cut away tiny chips of material.

Isang tamang sagot

  • … organic … resin … saw … throughout … grains.✓ Tamang sagot
  • … inorganic … oil … saw … grains … throughout.
Which of the following are precautions that must be taken when using portable grinding equipment?

Maraming tamang sagot

  • Wheel Flaking.✓ Tamang sagot
  • Slow Grinding Speed.✓ Tamang sagot
  • Fast Grinding Speed.
  • Wheel “Perspiring”.
  • Excessive Run-out or “Wobble”.✓ Tamang sagot
  • Rapid Disc Wear/Short Blade Life.✓ Tamang sagot
Select the statements which identify safe working practices for the use of abrasive wheels.

Maraming tamang sagot

  • To minimise the risk of bursting, abrasive wheels should always be run within the specified maximum rotation speed.✓ Tamang sagot
  • If a wheel is large enough the maximum rotation speed will be marked on the wheel.✓ Tamang sagot
  • Guards must be provided (on all types of wheel) to contain fragments that may fly off if the wheel bursts.✓ Tamang sagot
  • Relevant information and training should be provided to all personnel involved in the use of grinding operations.✓ Tamang sagot
  • For smaller wheels there should be a notice highlighting the maximum speed for each size of wheel.✓ Tamang sagot
  • Guards must be provided (on pedestal grinders only) to contain fragments that may fly off if the wheel burst.
  • Wheel rotation speeds (for all size of wheel) must be displayed on a notice.

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.