Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Furuno ECDIS para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 12 tanong sa 1 pangkat ang “Furuno ECDIS — FMD 3x00 v4.0 — Sensors”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

Where do you offset own ship's charted position in the FURUNO ECDIS?

Isang tamang sagot

  • In Symbol Display.
  • In Chart Display.
  • In Chart Menu.
  • In Own ship functions box.✓ Tamang sagot
Where can you reset the Trip Meter in the FURUNO FMD ECDIS?

Isang tamang sagot

  • I can reset the Trip Meter in the Voyage Log window in the Reset sub-menu of the Record menu.
  • I can reset the Trip Meter in the Voyage page of the Menu.✓ Tamang sagot
  • I cannot reset the Trip Meter in the ECDIS.
  • The Trip Meter can be reset in the Overlay/NAV Tools box.
What is the purpose of the Filter?

Isang tamang sagot

  • The Filter is the Antivirus software running on the FURUNO FMD ECDIS.
  • The Filter is used to calculate an astronomical position from several astronomical observations entered by the operator.
  • The Filter continuously monitors the data input from each individual position sensor to determine if the sensor data integrity is intact.✓ Tamang sagot
  • The Filter is used to verify the quality of data on the Base and Update CDs.
If your primary GPS fails - how do you switch to another position sensor in the FURUNO FMD ECDIS?

Isang tamang sagot

  • I cannot switch to another position sensor - a service technician is required to make the switch.
  • I change the position sensor setting in the Chart Display sub-menu.
  • I change the position sensor setting in the Sensor settings sub-menu.✓ Tamang sagot
  • I change the position sensor setting in the Conning Display window.
Where can you recalculate own ship's position to a position in a different datum?

Isang tamang sagot

  • In the Chart Display settings.
  • In the Own ship functions box.✓ Tamang sagot
  • In the Chart INFO dialogue.
  • In the Sensor Settings menu.

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.