Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Furuno ECDIS para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 13 tanong sa 1 pangkat ang “Furuno ECDIS — FMD 3x00 v4.0 — Safety Settings”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

How is the Safety Contour always displayed in the charts - regardless of the setting of two colour or four shades?

Isang tamang sagot

  • As an area with a light blue colour.
  • As an area with a dark blue colour.
  • As an area with a light grey colour.
  • As a thick grey line.✓ Tamang sagot
What is the maximum limit of the Look-ahead function?

Isang tamang sagot

  • There is no limit.
  • 120min. + 10NM + 3km + 500m.
  • 999min. + 999NM + 999km + 999m.
  • 20 NM + 240 min + 5km + 999m.✓ Tamang sagot
Where do you adjust the size of the chart watch sector that can be used to scan the ENCs for problems along own ship's course line?

Isang tamang sagot

  • In Chart Display settings.
  • In Chart Alert settings.
  • In Basic settings.
  • In the Look-ahead settings.✓ Tamang sagot
What is the Filter in the FURUNO ECDIS?

Isang tamang sagot

  • The Filter is a noise filter which improves the precision of the charts.
  • The Filter is a process filter which reduces the time it takes for the ECDIS to start up.
  • The Filter is a software function which continuously monitors the integrity of the navigation sensor data input in the ECDIS.✓ Tamang sagot
  • The Filter is a filter which continuously monitors the connections to the RADAR - the GPS - and the AIS.
What is the Safety Contour setting in the route planning tool used for?

Isang tamang sagot

  • Nothing - it is an informative setting only.
  • It is used as the monitored value of the Safety Contour for the Chart Alert and the Look Ahead functions when the ECDIS is operated in Voyage planning mode.
  • It is used for checking the air draft when sailing beneath bridges power lines etc..
  • It is used for the route plan check that is performed when planning a route.✓ Tamang sagot

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.