Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa Furuno ECDIS para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 4 tanong sa 1 pangkat ang “Furuno ECDIS — FMD 3x00 v3.1 — Position Event”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

Which operation can you perform on the FURUNO ECDIS?

Isang tamang sagot

  • I can record my position manually on the ENCs.✓ Tamang sagot
  • I can set the ECDIS to automatically choosing a Safety Contour based on my setting of Ship's maximum draft.
  • I can set Ship's maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.
  • I can send a copy of my Route Plan to an AIS target as a Safety Message.
Which operation can you perform on the FURUNO ECDIS?

Isang tamang sagot

  • I can play back my ship's past track on the ECDIS.
  • I can record my position manually on the RNCs.✓ Tamang sagot
  • I can create Notes from my Voyage Log to document a voyage on the charts.
  • I can set the ECDIS to include engine log information into the Voyage log automatically.
How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?

Isang tamang sagot

  • I cannot record own ship's position manually on the FURUNO ECDIS.
  • I record LOP in the Record function of the Event Log.✓ Tamang sagot
  • I press the [CTRL] && [ACQ/ACT] button on the Control Unit.
  • I select [Record][Event Log] and [User Event] from the Instant Access bar and insert the observation in the Record User Event window.
How do you manually record Own Ship's current position in the Logs?

Isang tamang sagot

  • By opening the Voyage Log and entering the current position.
  • By right clicking on own ship icon on the user interface.
  • By pressing the Record button on the Control Unit.
  • By using the record position event function of the Event Log.✓ Tamang sagot

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.