Libre para sa lahat ng marino ang mga internasyonal na pagsasanay sa IG MARITIME. Magparehistro nang minsan para ma-save ang progreso at makapaghanda nang walang limitasyon.

MCQ: Flameproof Ex d

Maghanap sa seksyong ito

Pumili ng pangkat ng mga tanong at magsimulang mag-aral o kumuha ng pagsusulit.

Tungkol sa pangkat na ito

May mga tanong sa CompEx para sa sariling pag-aaral. Pumili ng pangkat para magsimulang mag-aral o kumuha ng pagsusulit.

May 26 tanong sa 1 pangkat ang “CompEx — MCQ: Flameproof Ex d”.

Pag-aaral

Walang timer sa pag-aaral. Makikita ang resulta at tamang sagot pagkatapos sumagot. Maaari mong balikan ang tanong at ulitin ang paksa.

Pagsusulit

Hanggang 60 minuto at 50 tanong mula sa napiling pangkat ang pagsusulit. Makikita ang mga tamang sagot at resulta kapag tapos na.

Mga halimbawang tanong at sagot

Galing sa pangkat na ito ang mga halimbawa. Piliin ang Pag-aaral para isa-isahin ang mga tanong, o Pagsusulit para suriin ang kaalaman mo.

A function (live) test on a flameproof enclosure after some internal adjustments requires which one of the following as minimum requirement?

Isang tamang sagot

  • Fit only the corner bolts and apply a "Danger Live" notice
  • All bolts to be replaced- spanner tight- and flamepath gaps checked✓ Tamang sagot
  • Only one bolt fitted to support the cover and a :Danger Live" notice
  • Leave cover off, apply a "Danger Live" notice and make sure inadvertent contact with live parts is avoided
2) Which one of the following may be applied in the gap of a flameproof flanged joint to improve the IP rating?

Isang tamang sagot

  • (I) Thermosetting sealant;
  • (II) Non setting grease;✓ Tamang sagot
  • (III) Non-hardening grease bearing textile tape;
  • (IV) Any oil based paint.
Fitting new (metric thread) cable glands to older flameproof equipment, with imperial thread forms at cable gland entries, may be achieved by?

Isang tamang sagot

  • Re-tapping the entries using a metric tap the same size as the gland
  • Using an Exd adaptor with appropriate thread forms✓ Tamang sagot
  • Fitting threaded inserts after drilling
  • Fitting the metric glamd as far as possible with the aim of achieving five-full threads engagement
11) One of the design features of flameproof enclosures is?

Isang tamang sagot

  • (I) Electric field strength;
  • (II) A gas detector and alarm arrangement;
  • (III) Flanged and/or spigot joints;✓ Tamang sagot
  • (IV) An IP67 ingress protection level.
Obstruction of the flamepath openings of the flanged joints of Ex d enclosure by solid obstructions requires minimum clearance depending on the equipment group. For a IIC enclosure this not less than?

Isang tamang sagot

  • 30 mm
  • 40 mm✓ Tamang sagot
  • 10 mm
  • 50 mm

Bago magsimula

Kailangan bang magparehistro bago magsimula?

May 23 minutong guest access. Magparehistro nang libre para magpatuloy, ma-save ang progreso at balikan ang mga pagkakamali.

Anong wika ang gamit sa mga tanong?

Nananatili ang orihinal na wika ng mga tanong at opsyon. Puwedeng baguhin nang hiwalay ang wika ng interface.

Maaari bang gamiting opisyal na dokumento ang resulta?

Hindi. Para sa sariling pagsasanay ito. Ang resulta ay hindi kapalit ng pagsusulit, sertipiko o pagtatasa ng awtorisadong organisasyon.