Todas las pruebas internacionales de IG MARITIME son gratuitas para los marinos. Regístrate una vez para guardar tu progreso y prepararte sin límites.

CD1543. WHR System, Output Maximisation

Buscar en esta sección

Elige una colección de preguntas y empieza a estudiar o haz un simulacro de examen.

Sobre esta colección

La sección Seagull CBT ofrece preguntas para preparar la prueba por tu cuenta. Elige una colección para estudiar o hacer un simulacro de examen.

«Seagull CBT — CD1543. WHR System, Output Maximisation» contiene 15 preguntas en 1 colección.

Estudio

El modo de estudio no tiene límite de tiempo. Tras responder, puedes ver el resultado y las opciones correctas. Puedes volver a una pregunta y repetir el tema.

Simulacro

Un simulacro dura hasta 60 minutos e incluye hasta 50 preguntas de la colección elegida. Las soluciones y los resultados aparecen al terminar.

Ejemplos de preguntas y respuestas

Estos ejemplos pertenecen a la colección. Elige Estudio para practicar en orden o Simulacro para comprobar tus conocimientos.

What precautions should be taken to avoid the risk of fire in the exhaust boiler? Select the appropriate options and click Done.

Varias respuestas correctas

  • The cooling of the boiler should be maintained at all times.✓ Respuesta correcta
  • The exhaust gas boiler should not be run dry.✓ Respuesta correcta
  • The boiler should be kept clean.✓ Respuesta correcta
  • Water washing should be performed regularly.
Allen, on board the Margrethe vessel, wants to run the engine down just before the cut-in level of its auxiliary blowers. What must he remember? Select the appropriate options and click Done.

Varias respuestas correctas

  • He must monitor the exhaust gas temperature before and after the turbocharger.✓ Respuesta correcta
  • He must run the engine above the cut-out level and then slowly reduce the engine power to run the engine just above the auxiliary blower cut-in level.✓ Respuesta correcta
  • He must compare the vacuum pressure in the condenser with the design pressure.
  • He must set the load target to 100%.
David knows that the exhaust gas temperature for the Emma vessel should be 165°C or above to avoid the risk of sulphuric acid corrosion. However, as the ME load is low, the temperature of the exhaust gas is lower than 165°C. What should he do to avoid the risk of corrosion? Select the appropriate option and click Done.

Una respuesta correcta

  • Decrease the set-point pressure of the HP steam section.
  • Increase the vacuum condenser pressure.
  • Increase the set-point pressure of the LP steam section.✓ Respuesta correcta
The Chief Engineer onboard the Lima vessel wants to operate the WHR system at the beginning of a voyage. How should he manage the load depending on the status of the steam or power turbine? Drag and drop the ME load options into the correct placeholder and click Done.

Está disponible en estudio y búsqueda. Sin solución verificada queda fuera del examen.

El banco de origen no proporciona una respuesta verificada

Elementos originales de la pregunta
  • Increase load
  • Decrease load
  • Increase load
  • Decrease load
James needs to perform soot blowing on board the Gudrun vessel. What should be sequence of the steps? Arrange the steps in the correct sequence by dragging them to the appropriate placeholders and click Done.

Está disponible en estudio y búsqueda. Sin solución verificada queda fuera del examen.

El banco de origen no proporciona una respuesta verificada

Elementos originales de la pregunta
  • Blow soot from the LP section
  • Blow soot from the HP section
  • Again, blow soot from the LP section

Antes de empezar

¿Tengo que registrarme para empezar?

Puedes acceder como invitado durante 23 minutos. Regístrate gratis para seguir, guardar el progreso y revisar tus errores.

¿En qué idioma están las preguntas?

Las preguntas y las opciones conservan su idioma original. Puedes cambiar el idioma de la interfaz por separado.

¿Puedo usar mi resultado como documento oficial?

No. Es una práctica independiente. El resultado no sustituye un examen, certificado o prueba de una entidad autorizada.