Todas las pruebas internacionales de IG MARITIME son gratuitas para los marinos. Regístrate una vez para guardar tu progreso y prepararte sin límites.

CD0416. Fuel oil bunkering, Understanding test results

Buscar en esta sección

Elige una colección de preguntas y empieza a estudiar o haz un simulacro de examen.

Sobre esta colección

La sección Seagull CBT ofrece preguntas para preparar la prueba por tu cuenta. Elige una colección para estudiar o hacer un simulacro de examen.

«Seagull CBT — CD0416. Fuel oil bunkering, Understanding test results» contiene 22 preguntas en 1 colección.

Estudio

El modo de estudio no tiene límite de tiempo. Tras responder, puedes ver el resultado y las opciones correctas. Puedes volver a una pregunta y repetir el tema.

Simulacro

Un simulacro dura hasta 60 minutos e incluye hasta 50 preguntas de la colección elegida. Las soluciones y los resultados aparecen al terminar.

Ejemplos de preguntas y respuestas

Estos ejemplos pertenecen a la colección. Elige Estudio para practicar en orden o Simulacro para comprobar tus conocimientos.

According to this module, if distillate fuel onboard is found to have a high Acid number, what should you do?

Una respuesta correcta

  • Send a sample to a specialist testing agency to check for corrosion and/or chemical contamination.✓ Respuesta correcta
  • Increase the rate of cylinder lubrication oil feed, and keep the main engine cooling water temperatures high.
  • Add an alkali to the fuel.
  • Water-wash the fuel using the separators.
Why are catalytic fines so problematic when present in residual fuel oil? Select the ONE correct answer.

Una respuesta correcta

  • They are small and difficult to remove, but very hard and cause rapid wear of engine parts.✓ Respuesta correcta
  • They cannot be burned and therefore lead to sticky deposits in the combustion chambers of the engine.
  • They are an indication that the fuel has not been completely refined and may therefore give poor combustion.
  • They are an indication that the fuel oil has been contaminated with other waste oils, such waste lubricating oil, which will give poor combustion.
Why is the Micro Carbon Residue of a distillate fuel important? Select the ONE correct answer.

Una respuesta correcta

  • It is a measure of how much energy is released when the fuel is completely burned.
  • It is an indication of how likely it is that filters will be clogged, or need to be changed or back-flushed.
  • It is a measure of how abrasive the deposits left in the engine cylinder will be.
  • High levels result in more carbonaceous deposits in the engine.✓ Respuesta correcta
The condition of distillate fuels can often be quickly assessed by a visual inspection of the sample, which should be bright and clear. At what temperature should this test be carried out? Select the ONE correct answer.

Una respuesta correcta

  • Between 10 and 25 degrees Celsius.✓ Respuesta correcta
  • The sample should be cooled to below 10 degrees Celsius.
  • The sample should be warmed to at least 30 degrees.
  • The sample should be warmed to within 10 degrees Celsius of its closed flash point.
According to this module, how should Type 2 and 3 ECA compliant fuels be treated? Select the ONE correct answer.

Una respuesta correcta

  • They should be treated as residual heavy fuel oil of corresponding grade, particularly with regard to heating.✓ Respuesta correcta
  • They should be treated as distillate fuels.
  • They should not be heated in storage.
  • They should not be centrifuged, as this causes the constituents to separate.

Antes de empezar

¿Tengo que registrarme para empezar?

Puedes acceder como invitado durante 23 minutos. Regístrate gratis para seguir, guardar el progreso y revisar tus errores.

¿En qué idioma están las preguntas?

Las preguntas y las opciones conservan su idioma original. Puedes cambiar el idioma de la interfaz por separado.

¿Puedo usar mi resultado como documento oficial?

No. Es una práctica independiente. El resultado no sustituye un examen, certificado o prueba de una entidad autorizada.