Todas las pruebas internacionales de IG MARITIME son gratuitas para los marinos. Regístrate una vez para guardar tu progreso y prepararte sin límites.

CD0016. Corrosion Protection II

Buscar en esta sección

Elige una colección de preguntas y empieza a estudiar o haz un simulacro de examen.

Sobre esta colección

La sección Seagull CBT ofrece preguntas para preparar la prueba por tu cuenta. Elige una colección para estudiar o hacer un simulacro de examen.

«Seagull CBT — CD0016. Corrosion Protection II» contiene 26 preguntas en 1 colección.

Estudio

El modo de estudio no tiene límite de tiempo. Tras responder, puedes ver el resultado y las opciones correctas. Puedes volver a una pregunta y repetir el tema.

Simulacro

Un simulacro dura hasta 60 minutos e incluye hasta 50 preguntas de la colección elegida. Las soluciones y los resultados aparecen al terminar.

Ejemplos de preguntas y respuestas

Estos ejemplos pertenecen a la colección. Elige Estudio para practicar en orden o Simulacro para comprobar tus conocimientos.

The wet film of paint, which is applied, bears a direct relationship to the final dry film thickness of the coating. Taking wet film measurements can be very important. Why is it important to take these measurements as quickly as possible?

Una respuesta correcta

  • To avoid the fresh coat softening the coats underneath leading to possible wrong readings.
  • So that the painter is disturbed as little as possible.
  • To obtain as close a reading to the actual wet film as possible.✓ Respuesta correcta
Which of the following statements best describes one of the main advantages of Hydroblasting with fresh water as opposed to Dry Abrasive Blasting?

Una respuesta correcta

  • Produces a Surface Profile to aid adhesion of coatings to the surface.
  • Only requires air power for operation.
  • As well as removing corrosion products it also removes salt contamination.✓ Respuesta correcta
  • The prepared surfaces will flash rust.
A large area of exposed deck is to be blasted to an agreed standard of SA2 before application of an epoxy paint system. In the vicinity of some pipes where difficult access means that the blasting is not able to remove all the corrosion. What do you do?

Una respuesta correcta

  • Reject the whole blasted areas until blasting is redone to the correct SA2 standard.
  • Accept the blasted areas and go ahead with painting.
  • Discuss the various options with the contractor.✓ Respuesta correcta
Which are the 3 factors, which help contribute to correct performance of a paint system.

Varias respuestas correctas

  • The Paint itself✓ Respuesta correcta
  • The Correct Specification
  • The Correct Intervals between coats of paint
  • That clean Airless spray equipment is used
  • Proper Surface Preparation✓ Respuesta correcta
  • The amount of Time and Money spent on the paint and the application
  • Proper Application of Paint✓ Respuesta correcta
A large area of exposed deck is to be blasted to an agreed standard of SA2 before application of an epoxy paint system. In the vicinity of some pipes where difficult access means that the blasting is not able to remove all the corrosion. What do you do?

Una respuesta correcta

  • Reject the whole blasted areas until blasting is redone to the correct SA2 standard.
  • Accept the blasted areas and go ahead with painting.
  • Discuss the various options with the contractor.✓ Respuesta correcta

Antes de empezar

¿Tengo que registrarme para empezar?

Puedes acceder como invitado durante 23 minutos. Regístrate gratis para seguir, guardar el progreso y revisar tus errores.

¿En qué idioma están las preguntas?

Las preguntas y las opciones conservan su idioma original. Puedes cambiar el idioma de la interfaz por separado.

¿Puedo usar mi resultado como documento oficial?

No. Es una práctica independiente. El resultado no sustituye un examen, certificado o prueba de una entidad autorizada.