All international training tests on IG MARITIME are free for every seafarer. Register once to save your progress and prepare for your next voyage without limits!

CD1543. WHR System, Output Maximisation

Search this section

Choose a question set and start learning or take an exam.

About this collection

The Seagull CBT bank is organised into modules covering safety, shipboard operations, maintenance and other topics. Original module names and codes are retained to help you find the topic you need.

“Seagull CBT — CD1543. WHR System, Output Maximisation” contains 15 questions across 1 collection.

Learning

Learning mode has no timer. After answering, you see feedback and the correct options. You can return to a question and repeat a topic.

Exam

A practice exam lasts up to 60 minutes and includes up to 50 questions from the selected collection. Correct answers and results appear after completion.

Sample questions and answers

These examples come from the published collection. Choose Learning to study questions in sequence, or Exam to check your knowledge.

What precautions should be taken to avoid the risk of fire in the exhaust boiler? Select the appropriate options and click Done.

Multiple correct answers

  • The cooling of the boiler should be maintained at all times.✓ Correct answer
  • The exhaust gas boiler should not be run dry.✓ Correct answer
  • The boiler should be kept clean.✓ Correct answer
  • Water washing should be performed regularly.
Allen, on board the Margrethe vessel, wants to run the engine down just before the cut-in level of its auxiliary blowers. What must he remember? Select the appropriate options and click Done.

Multiple correct answers

  • He must monitor the exhaust gas temperature before and after the turbocharger.✓ Correct answer
  • He must run the engine above the cut-out level and then slowly reduce the engine power to run the engine just above the auxiliary blower cut-in level.✓ Correct answer
  • He must compare the vacuum pressure in the condenser with the design pressure.
  • He must set the load target to 100%.
David knows that the exhaust gas temperature for the Emma vessel should be 165°C or above to avoid the risk of sulphuric acid corrosion. However, as the ME load is low, the temperature of the exhaust gas is lower than 165°C. What should he do to avoid the risk of corrosion? Select the appropriate option and click Done.

One correct answer

  • Decrease the set-point pressure of the HP steam section.
  • Increase the vacuum condenser pressure.
  • Increase the set-point pressure of the LP steam section.✓ Correct answer
The Chief Engineer onboard the Lima vessel wants to operate the WHR system at the beginning of a voyage. How should he manage the load depending on the status of the steam or power turbine? Drag and drop the ME load options into the correct placeholder and click Done.

This item is available in learning and search. Without a verified answer key it is excluded from exams.

The export does not provide a verified answer key

Original task elements
  • Increase load
  • Decrease load
  • Increase load
  • Decrease load
James needs to perform soot blowing on board the Gudrun vessel. What should be sequence of the steps? Arrange the steps in the correct sequence by dragging them to the appropriate placeholders and click Done.

This item is available in learning and search. Without a verified answer key it is excluded from exams.

The export does not provide a verified answer key

Original task elements
  • Blow soot from the LP section
  • Blow soot from the HP section
  • Again, blow soot from the LP section

Before you start

Do I need to register to start?

Guest access lasts 23 minutes. Free registration lets you continue without limits, save progress and review mistakes in your account.

What language are the questions in?

Questions and answer options retain the language of the original bank. You can change the interface language separately.

Can I use my result as an official document?

No. This is independent practice. A result does not replace an examination, certificate or knowledge check by an authorised organisation.