All international training tests on IG MARITIME are free for every seafarer. Register once to save your progress and prepare for your next voyage without limits!

EN-IEB.AEN / OE1 / 7

Search this section

Choose a question set and start learning or take an exam.

About this collection

The ANR bank contains many sets with original names and codes, including navigation, safety and equipment topics. Select a module by name or use question search.

“ANR — IEB.AEN-Manag — EN-IEB.AEN / OE1 / 7” contains 13 questions across 1 collection.

Learning

Learning mode has no timer. After answering, you see feedback and the correct options. You can return to a question and repeat a topic.

Exam

A practice exam lasts up to 60 minutes and includes up to 50 questions from the selected collection. Correct answers and results appear after completion.

Sample questions and answers

These examples come from the published collection. Choose Learning to study questions in sequence, or Exam to check your knowledge.

Two 100 watt light bulbs are connected in parallel across a 100 volt power supply The total power developed in the circuit is

One correct answer

  • 200 watts✓ Correct answer
  • 100 watts
  • 50 watts
  • equal to the product of the amperes times the voltage in each branch
The source of emergency lighting and power at loss of normal ship's power on a cargo vessel should be obtained from the

One correct answer

  • emergency generator supply to the emergency switchboard✓ Correct answer
  • emergency generator supply to the main switchboard
  • battery supply to the main switchboard
  • turbogenerator supply to the emergency switchboard
Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness?

One correct answer

  • Fill the motor housing with CO2 to inert the space.
  • Strap silica gel around the commutator.
  • Place heat lamps in the motor housings.✓ Correct answer
  • Cover the equipment with a canvas tarpaulin.
What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source?

One correct answer

  • 0.161 amperes
  • 0.631 amperes
  • 1.583 amperes✓ Correct answer
  • 6.199 amperes
The illustration EL-0081 shows a fluorescent light fixture The ends of the lamp alternately glow and become dark, but the tube will not light The most probable cause is thatQuestion illustration

One correct answer

  • component "D" is loose and due to the ship's vibrations makes and breaks contact
  • the power system's voltage is fluctuating in and out of the range necessary for proper operation
  • component "A" is shorted and therefore unable to produce the high voltage required to start the lamp✓ Correct answer
  • component "B" contacts are opening and closing thus prohibiting sufficient current flow

Before you start

Do I need to register to start?

Guest access lasts 23 minutes. Free registration lets you continue without limits, save progress and review mistakes in your account.

What language are the questions in?

Questions and answer options retain the language of the original bank. You can change the interface language separately.

Can I use my result as an official document?

No. This is independent practice. A result does not replace an examination, certificate or knowledge check by an authorised organisation.