All international training tests on IG MARITIME are free for every seafarer. Register once to save your progress and prepare for your next voyage without limits!

Choose a question set and start learning or take an exam.

About this collection

The ANR bank contains many sets with original names and codes, including navigation, safety and equipment topics. Select a module by name or use question search.

“ANR — 03_CES_DM5 — EN-DM5-MHS” contains 21 questions across 1 collection.

Learning

Learning mode has no timer. After answering, you see feedback and the correct options. You can return to a question and repeat a topic.

Exam

A practice exam lasts up to 60 minutes and includes up to 50 questions from the selected collection. Correct answers and results appear after completion.

Sample questions and answers

These examples come from the published collection. Choose Learning to study questions in sequence, or Exam to check your knowledge.

When connecting a tug, what speed do you think is the best for your vessel to maintain during this operation?

One correct answer

  • Stop the vessel completely before connecting.✓ Correct answer
  • The speed should be more than 7 knots.
  • A tug may be connected at any convenient speed.
  • The speed should be less than 5 knots, normally 3 - 5 knots.
A tug is connected by a line at your bow. Will the bollard pull be the same at any speed? Choose the most complete answer.

One correct answer

  • Yes, the bollard pull is the same at any speed.
  • No, when the speed is increasing, the bollard pull is also increasing.
  • No, when the speed exceeds 5 knots the tug will not be of much help.✓ Correct answer
  • No, best use of a tug is made when the ship is going astern.
Most large tankers are moored using wire ropes on winches in order to remain safely moored alongside. If extra mooring lines are required, would a mixture of wires and full-length synthetic fibre ropes be appropriate?

One correct answer

  • No, because the wires would take most of the strain and the fibre ropes practically none.✓ Correct answer
  • Yes, because the extra fibre ropes are easier to handle.
  • No, because most fibre ropes of the required breaking strain are large and difficult to handle.
  • Yes, because the fibre ropes are more flexible and complement the wires, adding to the overall effectiveness of the mooring.
Overshoot is an expression used when talking about a ship's steering ability. How can overshoot be determined?

One correct answer

  • Do a 360 degrees turning circle.
  • Do a 540 degrees turning circle.
  • Do a standing turn.
  • Do a 20/20 degree zigzag manoeuvre.✓ Correct answer
The rudder is in the hard over position, propeller stopped. The ship is turning slowly. What can be done to make her turn faster without increasing forward speed?

One correct answer

  • Give full astern until the ship has stopped, then full ahead again with the rudder hard over.
  • Give a kick ahead.✓ Correct answer
  • Give slow ahead.
  • Give half astern.

Before you start

Do I need to register to start?

Guest access lasts 23 minutes. Free registration lets you continue without limits, save progress and review mistakes in your account.

What language are the questions in?

Questions and answer options retain the language of the original bank. You can change the interface language separately.

Can I use my result as an official document?

No. This is independent practice. A result does not replace an examination, certificate or knowledge check by an authorised organisation.