Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD7025. TOTS 1B-Maintenance and Repair

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD7025. TOTS 1B-Maintenance and Repair“ enthält 56 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

During routine rounds of the main engine, you note that the pipe leading to one of the air start valves is hot. Do you?

Eine richtige Antwort

  • Contact the bridge and request permission to stop immediately.✓ Richtige Antwort
  • Attach a portable temperature gauge to record the temperature.
  • Advise the watch keepers to monitor it and report if the temperature increases.
  • Apply portable ventilators to cool the pipe down.
The purpose of fine mesh screens on bunker tank vent heads is to?

Eine richtige Antwort

  • Prevent flames from passing into the tank.✓ Richtige Antwort
  • Prevent dirt from getting into the fuel tank.
  • Prevent accidental overflow from the tank.
  • Prevent the fumes from the tank affecting personnel working close by.
What is the recommended DC voltage output from a welding machine?

Eine richtige Antwort

  • Less than 70V.✓ Richtige Antwort
  • Less than 240V.
  • Less than 110V.
  • Less than 440V.
Where would you find the correct value for clearances of the main engine main bearings?

Eine richtige Antwort

  • In the main engine instruction manual.✓ Richtige Antwort
  • In the main engine spare parts manual.
  • In the main engine lubricating oil piping diagram.
  • In the Official log book
Which property of fuel oil is used to select the gravity disc of the fuel oil purifier?

Eine richtige Antwort

  • The density.✓ Richtige Antwort
  • The viscosity.
  • The water content.
  • The sulphur content.

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.