Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD1543. WHR System, Output Maximisation

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD1543. WHR System, Output Maximisation“ enthält 15 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

What precautions should be taken to avoid the risk of fire in the exhaust boiler? Select the appropriate options and click Done.

Mehrere richtige Antworten

  • The cooling of the boiler should be maintained at all times.✓ Richtige Antwort
  • The exhaust gas boiler should not be run dry.✓ Richtige Antwort
  • The boiler should be kept clean.✓ Richtige Antwort
  • Water washing should be performed regularly.
Allen, on board the Margrethe vessel, wants to run the engine down just before the cut-in level of its auxiliary blowers. What must he remember? Select the appropriate options and click Done.

Mehrere richtige Antworten

  • He must monitor the exhaust gas temperature before and after the turbocharger.✓ Richtige Antwort
  • He must run the engine above the cut-out level and then slowly reduce the engine power to run the engine just above the auxiliary blower cut-in level.✓ Richtige Antwort
  • He must compare the vacuum pressure in the condenser with the design pressure.
  • He must set the load target to 100%.
David knows that the exhaust gas temperature for the Emma vessel should be 165°C or above to avoid the risk of sulphuric acid corrosion. However, as the ME load is low, the temperature of the exhaust gas is lower than 165°C. What should he do to avoid the risk of corrosion? Select the appropriate option and click Done.

Eine richtige Antwort

  • Decrease the set-point pressure of the HP steam section.
  • Increase the vacuum condenser pressure.
  • Increase the set-point pressure of the LP steam section.✓ Richtige Antwort
The Chief Engineer onboard the Lima vessel wants to operate the WHR system at the beginning of a voyage. How should he manage the load depending on the status of the steam or power turbine? Drag and drop the ME load options into the correct placeholder and click Done.

Die Frage ist im Lernmodus und in der Suche verfügbar. Ohne geprüfte Lösung wird sie nicht in Prüfungen verwendet.

Die Quelldaten enthalten keinen geprüften Lösungsschlüssel

Originalelemente der Aufgabe
  • Increase load
  • Decrease load
  • Increase load
  • Decrease load
James needs to perform soot blowing on board the Gudrun vessel. What should be sequence of the steps? Arrange the steps in the correct sequence by dragging them to the appropriate placeholders and click Done.

Die Frage ist im Lernmodus und in der Suche verfügbar. Ohne geprüfte Lösung wird sie nicht in Prüfungen verwendet.

Die Quelldaten enthalten keinen geprüften Lösungsschlüssel

Originalelemente der Aufgabe
  • Blow soot from the LP section
  • Blow soot from the HP section
  • Again, blow soot from the LP section

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.