Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0360. Crude oil tankers, Control of flow rates during loading

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0360. Crude oil tankers, Control of flow rates during loading“ enthält 14 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

According to SOLAS, who should control closing and opening of the valves on the inert gas distribution line? Select the ONE correct answer.

Eine richtige Antwort

  • The officer in charge of the cargo transfer✓ Richtige Antwort
  • The Master, or the appointed deputy if ashore
  • The duty rating when checking for cargo leaks on deck
  • The Chief Engineer or the appointed deputy
During loading, which of the following must be monitored particularly closely while venting through a terminal’s vapour return line? Select the TWO correct answers.

Mehrere richtige Antworten

  • Cargo tank vapour pressure✓ Richtige Antwort
  • Cargo loading rate✓ Richtige Antwort
  • Cargo vapour temperature increase
  • Vapour growth in the cargo tank
Which of the following factors are used to determine the size and venting capacity of a cargo oil tank pressure-vacuum valve? Select the TWO best answers.

Mehrere richtige Antworten

  • The design loading rate✓ Richtige Antwort
  • Vapour growth during loading✓ Richtige Antwort
  • The height of the pressure-vacuum valve above the deck
  • The horizontal distance between the inert gas inlet and the pressure/vacuum valve
How can the contents of a cargo tank that is not being loaded be checked to see whether or not the ullage is changing during loading? Select the TWO best answers.

Mehrere richtige Antworten

  • Set the high and low level alarm close to either side of the ullage of the tank and monitor closely✓ Richtige Antwort
  • Check that any ullage change can be explained by changes in trim, list or temperature✓ Richtige Antwort
  • Check that the loading rate for the tank is always shown as zero on the on-line loading instrument
  • Check to see that the ullage remains constant; any change would indicate tank leakage
During loading, there is a small but continuous change in the ullage of a filled tank not involved in the loading operation. What is the most likely cause? Select the ONE best answer.

Eine richtige Antwort

  • The hydraulic suction valve for the tank has crept open very slightly✓ Richtige Antwort
  • There has been an increase in cargo temperature
  • There has been a change of trim
  • There has been a change of list

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.