Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0231. High Voltage, Ship's electrical networks

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0231. High Voltage, Ship's electrical networks“ enthält 35 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

Which one of the following best describes why the overall system power factor is important when operating electrical generators on a ship?

Eine richtige Antwort

  • It determines the total current that the generators must produce for a given active power✓ Richtige Antwort
  • It determines the kilowatt load on the generators
  • It determines the fuel consumption of generators
  • The overall system power factor cannot safely exceed 0.95
Which one of the following best describes why physical forces can be created from the interaction of 2 magnets?

Eine richtige Antwort

  • The magnets move to make the lines of magnetic flux as short as possible✓ Richtige Antwort
  • The magnets move because of an electrical charge stored within them
  • The magnets move to even out the flux density
  • The magnets move if the lines of magnetic flux are forced to cross
High voltage ships tend to use earthed neutral electrical networks. Which one of the following best describes how excessive fault currents are prevented in the event of an earth fault on these ships?

Eine richtige Antwort

  • An impedance is placed in the neutral earthing line✓ Richtige Antwort
  • The risk of earth faults is reduced by extra planned maintenance
  • Earth leakage circuit breakers are used on every circuit
  • An impedance is placed in each output cable from the generators
The kilowatt load on the ship’s only running generator is steady but the power factor meter shows a fall from 0.9 to 0.75. Which one of the following best describes the risk that this change in power factor poses for the ship’s electrical network?

Eine richtige Antwort

  • The increase in apparent power may cause an overcurrent trip to operate✓ Richtige Antwort
  • The fuel consumption of the generator will be increased and the fuel could run out before arrival in port
  • The decrease in reactive power could cause supply cables to get hotter
  • The galley stove might burn out
Which one of the following options best describes why each feed normally leaves the section boards in a ship’s electrical network via some form of isolation?

Eine richtige Antwort

  • To allow for maintenance on the circuit✓ Richtige Antwort
  • To allow motors to be stopped remotely
  • To allow lights to be switched off remotely
  • To protect against slow overloads

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.