Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0218. Oil Record Book, Part I

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0218. Oil Record Book, Part I“ enthält 54 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

When starting a new oil record book you notice that the oily water separator capacity on the IOPP certificate does not match that on the oily water separator name plate. Which one of the following best describes what you should do about this?

Eine richtige Antwort

  • Ask the master to get the IOPP certificate corrected✓ Richtige Antwort
  • Ignore it as the ship is already 7 years old
  • Scratch out the capacity on the oily water separator name plate so it cannot be read
  • Assume that the oily water separator capacity has been downgraded
Which one of the following best describes how you can enter the quantity of water pumped overboard from the engine room bilge wells through the oily water separator (OWS) into the oil record book when you have no sounding tables for the bilge wells?

Eine richtige Antwort

  • You need to estimate the quantity pumped from the OWS capacity and the time it was used for✓ Richtige Antwort
  • You can estimate the quantity by looking into the bilge well before and after pumping
  • You cannot pump water directly from bilge wells without putting it in a tank to measure the quantity first
  • The quantity does not need to be entered into the oil record book because it has not been in a calibrated tank
Which one of the following is recommended as the first thing to do when starting a new oil record book?

Eine richtige Antwort

  • Check that it contains the current operation codes✓ Richtige Antwort
  • Check that it has a blue cover
  • Check that it has a green cover
  • Write the ship’s name on it
The oil record book entry relates to the transfer of 2 m³of sludge to the Incinerator Sludge Service Tank from the Main Sludge Tank, ready for burning. Which one of the following is the correct operation code to enter?

Eine richtige Antwort

  • Code C✓ Richtige Antwort
  • Code D
  • Code E
  • Code H
Which one of the following describes the best way to find out which tanks have been designated for sludge and which for holding bilge water on your ship, as far as oil record book entries are concerned?

Eine richtige Antwort

  • Check the IOPP certificate✓ Richtige Antwort
  • Check the capacity plan
  • Check the tank plan
  • Check the bilge and waste oil system drawings

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.