Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0166. Separators, ALCAP Monitoring and control

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0166. Separators, ALCAP Monitoring and control“ enthält 16 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

Which of the following statements is correct?

Eine richtige Antwort

  • Electrical inputs connect to the left side of the control module.
  • Electrical inputs connect to the right side of the control module.✓ Richtige Antwort
  • The transducer connects to terminals on the rear circuit board.
  • Electrical outputs connect to the left and right side of the front circuit board.
Which of the following statements is correct?

Eine richtige Antwort

  • The EPC 400 has 2 printed circuit cards to monitor ALCAP functions.
  • The EPC 400 monitors the transducer and co-ordinates the ALCAP functions with the operating sequence.✓ Richtige Antwort
  • There are 4 different generations of EPC 400.
  • The EPC 400 can be adjusted to suit different operating voltages.
Before disconnecting any cables to the EPC 400 it should be isolated by?

Eine richtige Antwort

  • The EPC 400 only runs on 48 volts, it is not necessary to isolate.
  • Switching off the EPC with the fuse switch, located in the top left hand corner of the box.
  • Switching off the motor starter.
  • Switching off the electrical supply to the EPC.✓ Richtige Antwort
What happens if you keep the alarm accept button pressed for more than 5 seconds?

Eine richtige Antwort

  • It is possible to display extra process conditions.
  • 32 previous alarms are displayed.
  • A ‘Lamp test’ of all LED’s.✓ Richtige Antwort
  • A test of the alarm output to the central control room.
The fuses on the front circuit board are numbered from the top as?

Eine richtige Antwort

  • F1, F2 and F3
  • F2, F3 and F1
  • F3, F1 and F2
  • F2, F1 and F3✓ Richtige Antwort
  • F3, F2 and F1

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.