Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0152. Hatch Cover Maintenance - Bulk Carrier

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0152. Hatch Cover Maintenance - Bulk Carrier“ enthält 107 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

You are carrying out maintenance on number 3 hatch cover. The permanent set has reached half the design compression in places and there are signs of wear. You have cut out two metres of bad seal along the port side. What length of rubber will you actually cut to insert in its place?

Eine richtige Antwort

  • 2.06 m✓ Richtige Antwort
  • 2 m
  • 1.94 m
  • 2.03 m
  • 1.97 m
In a four-panel arrangement, the cylinders are operated once the cleats are all released, causing the first, or “leading” pair of panels to peak. At this time, what is happening to the second pair of panels?

Eine richtige Antwort

  • The wheels of the “trailing pair” roll up onto their trackways✓ Richtige Antwort
  • They are also “peaking” in parallel
  • Nothing is happening to the second pair of panels. They are totally independent
  • The third panel is raised at 45 degrees and the fourth is about to begin elevating
The immediate effects of improper penetration into the hatch seal by the compression bar are shown below. Drag and drop the applicable effect onto the corresponding type of improper penetration.Das Originalbild ist nicht verfügbar.

Die Frage ist im Lernmodus und in der Suche verfügbar. Ohne geprüfte Lösung wird sie nicht in Prüfungen verwendet.

Die Quelldaten enthalten keinen geprüften Lösungsschlüssel

Originalelemente der Aufgabe
  • Damage to the seal rubber and rapid failure of the seal
  • Seawater can get past the seal
What will an inspection prior to discharge primarily establish?

Eine richtige Antwort

  • Whether the measures taken in sealing the hatch after loading were successful✓ Richtige Antwort
  • Whether there is any damage to the hatch cover panels
  • Whether there is any damage to the trackway
  • Whether the checklist completed after loading was correctly filled out
  • Whether the hatch was closed properly
  • Whether there was unusually heavy weather on passage
When replacing the straight pieces of a hatch seal, what is the recommended additional percentage to be allowed when cutting?

Eine richtige Antwort

  • 3 %✓ Richtige Antwort
  • None, it should be cut to the exact length required
  • 1 %
  • 5 %
  • It should be undercut by 3 % and stretched during fitting

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.