Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0130. LRM - IHI GTC

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0130. LRM - IHI GTC“ enthält 61 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

All inspections, other than weekly and monthly and any servicing and repair, other than routine, should be conducted by which of the following persons?

Eine richtige Antwort

  • The Master.
  • A manufacturer’s representative or a person appropriately trained and certified by the manufacturer for the work to be done.✓ Richtige Antwort
  • A Company Superintendent.
  • A senior officer or a fitter suitable qualified and holding a certificate in lifeboat maintenance.
Which face of the D-shaped cam pin should be in contact with the locking-plate when it is in the closed postion?

Eine richtige Antwort

  • The flat face.
  • The curved face.✓ Richtige Antwort
How is the D-shaped cam pin turned back into position under the locking plate during resetting?

Eine richtige Antwort

  • By manually lifting the cam reset lever.✓ Richtige Antwort
  • By the hook pressing against the locking plate.
  • By re-engaging the stopper lever.
  • By pushing the remote release handle back into position.
Which of the following components is spring-loaded?

Eine richtige Antwort

  • The remote release handle.
  • The after hook.
  • The D-shaped cam pin.
  • The stopper lever.✓ Richtige Antwort
An “on-load release mechanism” is defined as:

Eine richtige Antwort

  • one that can be released at any time from any height.
  • one designed to be operated when the boat is hanging in the falls at an approximate height of 2-3 metres above the water.
  • one designed to be operated when the boat has been lowered and is waterborne, whether or not a load is being applied to it by the action of the ship or the sea.✓ Richtige Antwort
  • one designed to be operated when the load applied to them is removed – that is, when the boat has been lowered and is waterborne.

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.