Alle internationalen Übungstests auf IG MARITIME stehen Seeleuten kostenlos zur Verfügung. Registrieren Sie sich einmal, um Ihren Fortschritt zu speichern und ohne Einschränkungen zu üben.

CD0016. Corrosion Protection II

Diesen Bereich durchsuchen

Wählen Sie einen Fragensatz und starten Sie den Lernmodus oder eine Probeprüfung.

Über diesen Fragensatz

Im Bereich Seagull CBT finden Sie Fragen zur eigenständigen Vorbereitung. Wählen Sie einen Fragensatz für den Lernmodus oder eine Probeprüfung.

„Seagull CBT — CD0016. Corrosion Protection II“ enthält 26 Fragen in 1 Sammlung.

Lernmodus

Der Lernmodus hat kein Zeitlimit. Nach jeder Antwort sehen Sie die Auswertung und die richtigen Optionen. Sie können Fragen und Themen wiederholen.

Probeprüfung

Eine Probeprüfung dauert bis zu 60 Minuten und umfasst bis zu 50 Fragen aus dem gewählten Satz. Die Lösungen und Ergebnisse erscheinen nach Abschluss.

Beispielfragen und Antworten

Diese Beispiele stammen aus dem Fragensatz. Wählen Sie den Lernmodus für die schrittweise Bearbeitung oder eine Probeprüfung zum Selbsttest.

The wet film of paint, which is applied, bears a direct relationship to the final dry film thickness of the coating. Taking wet film measurements can be very important. Why is it important to take these measurements as quickly as possible?

Eine richtige Antwort

  • To avoid the fresh coat softening the coats underneath leading to possible wrong readings.
  • So that the painter is disturbed as little as possible.
  • To obtain as close a reading to the actual wet film as possible.✓ Richtige Antwort
Which of the following statements best describes one of the main advantages of Hydroblasting with fresh water as opposed to Dry Abrasive Blasting?

Eine richtige Antwort

  • Produces a Surface Profile to aid adhesion of coatings to the surface.
  • Only requires air power for operation.
  • As well as removing corrosion products it also removes salt contamination.✓ Richtige Antwort
  • The prepared surfaces will flash rust.
A large area of exposed deck is to be blasted to an agreed standard of SA2 before application of an epoxy paint system. In the vicinity of some pipes where difficult access means that the blasting is not able to remove all the corrosion. What do you do?

Eine richtige Antwort

  • Reject the whole blasted areas until blasting is redone to the correct SA2 standard.
  • Accept the blasted areas and go ahead with painting.
  • Discuss the various options with the contractor.✓ Richtige Antwort
Which are the 3 factors, which help contribute to correct performance of a paint system.

Mehrere richtige Antworten

  • The Paint itself✓ Richtige Antwort
  • The Correct Specification
  • The Correct Intervals between coats of paint
  • That clean Airless spray equipment is used
  • Proper Surface Preparation✓ Richtige Antwort
  • The amount of Time and Money spent on the paint and the application
  • Proper Application of Paint✓ Richtige Antwort
A large area of exposed deck is to be blasted to an agreed standard of SA2 before application of an epoxy paint system. In the vicinity of some pipes where difficult access means that the blasting is not able to remove all the corrosion. What do you do?

Eine richtige Antwort

  • Reject the whole blasted areas until blasting is redone to the correct SA2 standard.
  • Accept the blasted areas and go ahead with painting.
  • Discuss the various options with the contractor.✓ Richtige Antwort

Vor dem Start

Muss ich mich vor dem Start registrieren?

Der Gastzugang dauert 23 Minuten. Registrieren Sie sich kostenlos, um weiterzulernen, den Fortschritt zu speichern und Fehler nachzuarbeiten.

In welcher Sprache sind die Fragen?

Fragen und Antwortoptionen bleiben in ihrer Originalsprache. Die Sprache der Oberfläche können Sie unabhängig davon ändern.

Kann ich das Ergebnis als offizielles Dokument verwenden?

Nein. Dies ist eine selbstständige Übung. Das Ergebnis ersetzt keine Prüfung, Bescheinigung oder Wissenskontrolle einer zugelassenen Stelle.